Starting the BIOS Configuration Utility

To configure the BIOS, start the BIOS configuration utility using the following steps:

1. Power on the workstation, and then tap the left or right lower third of the BIOS splash screen until the system beeps and the BIOS Home screen appears.

You can also enter BIOS using a USB keyboard:

1. Connect a USB keyboard to the Compact Workstation 310.

2. Power on or restart the workstation.

3. Press F2 at the BIOS splash screen. The system beeps and the BIOS Home Screen appears.

If the workstation boots into the operating system without starting the BIOS configuration utility, restart the workstation and try again.