The Flexible Stand is a mounting option for the Compact Workstation 310. When using this option, ensure that the stand is properly secured to a counter.
Note: The mounting screws are not provided. Ensure that you are using screws that meet the needs of the installation. The stand mounting hole diameter is ~4.9mm (0.193” = ~3/16”) and will accept up to a #10 or M4 screw. The screw length should be a minimum of one inch plus the thickness of the counter.
Note: If using a battery power option in conjunction with your workstation, you must first attach the battery enclosure to the stand before securing the stand to the counter.
Note: Connect and route all required cables before securing the stand to the counter.
Parent topic: Workstation Setup