RxFabrRequestMsgQueuePeak

Measurement ID

10600

Measurement Group

DSR Application Performance

Measurement Type

Max

Measurement Dimension

Single

Description

The peak DSR Application’s Request Message Queue utilization (0-100%) measured during the collection interval.

Collection Interval

5 min

Peg Condition

The maximum Request Message Queue utilization sample taken during the collection interval.

Measurement Scope

Server Group

Recovery

1. Display and monitor the DSR Application status by selecting Diameter > Maintenance > Applications. Verify that the Admin State is set as expected.
   The DSR Application's Request Message Queue Utilization is approaching its maximum capacity. This alarm should not normally occur when no other congestion alarms are asserted.
2. Application Routing might be mis-configured and is sending too much traffic to the DSR Application. Verify the configuration by selecting Diameter > Configuration > Application Routing Rules.
3. If no additional congestion alarms are asserted, the DSR Application Task might be experiencing a problem that is preventing it from processing message from its Request Message Queue. Examine the Alarm log in Alarms & Events
4. If the problem persists, it is recommended to contact My Oracle Support (MOS).