E2900 Cmd Rej: NEI LBP must be defined as the last link element

The loopback point (LBP) ID of the remote link element (RLE) must define the last element on the link. For example, for ent-lbp:loc=1101:port=a:lbp=2:rle=nei:lfst=llt, the NEI loopback point 2, at card location 1101 port a, must be the last element on that signaling link/

Recovery

1. Display all the loopback points on the signaling links for this STP. Enter the rtrv-lbp command.
   The loopback point IDs for each signaling link are displayed in numerical order in the LBP field. Refer to the output examples for the rtrv-lbp command in the Commands User's Guide.
2. Using the output from Step 1, determine the loopback point ID of the last element on the signaling link in question.
3. Re-enter the command that generated this error message, specifying a valid combination of parameters. Refer to the command description in Commands User's Guide for assistance.
   Contact My Oracle Support if this error message appears again. See My Oracle Support (MOS).