E4393 Cmd Rej: Origin Based SCCP Routing feature must be enabled

For the ent/chg-gta commands, the Origin Based SCCP Routing (OBSR) feature must be enabled before the opcsn, cgpc/cgpca/cgpci/cgpcn/cgpcn24, opc/opca/opci/opcn/opcn24, or (e)cgssn parameters can be specified.

For the dlt/rtrv-gta command, the OBSR feature must be enabled if the cgpc/cgpca/cgpci/cgpcn/cgpcn24, opc/opca/opci/opcn/opcn24, or (e)cgssn parameters can be specified.

For the chg/ent/rtrv-gttsel commands, the OBSR feature must be enabled before the cdgtasn, cggtasn, cgpcsn, or cgssn parameters can be specified.

For the dlt-gttsel command, the OBSR feature must be enabled before the cgssn parameter can be specified.

For the ent/rtrv-gttset commands, the OBSR feature must be enabled before the settype parameter can have a value of cggta, cgssn, opc, or cgpc.

For the chg/ent-ls commands, the OBSR feature must be enabled before the gttmode parameter can have a value of acdcd, cgacdcd, acdcgcd, acdcdcg, cgcd, cdcg, or cg.

For the chg-sccpopts command, the OBSR feature must be enabled before the dfltgttmode parameter can have a value of acdcd, cgacdcd, acdcgcd, acdcdcg, cgcd, cdcg, or cg.

Recovery

1. Display the status of the OBSR feature. Enter the rtrv-ctrl-feat command.
   If the feature does not appear in the output, then the feature is not enabled. If the feature has a status of OFF, then the feature is enabled but is not turned on.
2. Enable the feature as necessary. Refer to the Database Administration - GTT User's Guide for assistance.
3. Re-enter the command that generated this error message.
   Contact My Oracle Support if this error message appears again. See My Oracle Support (MOS).