E4102 Cmd Rej: At least one MPS based feature must be enabled/ON

The G-Flex, INP, AINPQ, G-Port, EIR, LNP ELAP Configuration, Prepaid SMS Intercept Ph1, A-Port, or V-Flex feature must be turned on before the following actions can be performed:

• The dsmaud parameter can be specified in the chg-stpopts command
• The db=mps parameter can be specified in the rept-stat-db command
• The rept-stat-mps command can be entered

Recovery

1. Enter the rtrv-ctrl-feat command display the status of the controlled features in the system.

   If the feature does not appear in the output, then the feature is not enabled. If the feature has a status of OFF, then the feature is enabled but is not turned on.

2. Enable and turn on the desired feature. Refer to the associated feature manual for assistance.
3. Re-enter the command that generated this error message.