Go to primary content
Oracle® Communications Measurements Reference
Release 46.6
E93320 Revision 1
Go To Table Of Contents
Contents

Previous
Previous
Next
Next

STP RBASE Report

Command Examples

  • UI
    • rept-meas:type=rbase:enttype=stp
  • FTP
    • rept-ftp-meas:type=rbase:enttype=stp

Measurement Events

Table 3-210 Record Base STP Measurements

Event Name Description Unit

BUSS

The number of IS-NR or IS-ANR IMT buses

peg count

CTSDLSST

The value of the SCCP Management: subsystem status test (SS7) delay timer (level 3 T32 timer). This value of this timer is fixed at 30 seconds and is not configurable.

seconds

LINKS

The number of configured signaling links.

peg count

LNKSETS

The number of configured linksets.

peg count

NT1TDCHO

The value of the delay to avoid mis-sequencing on changeover timer (level 3 T1 timer).

seconds

NT2CHOAK

The value of the waiting for changeover acknowledgment timer (level 3 T2 timer).

seconds

NT3TDCHB

The value of the delay to avoid mis-sequencing on changeback timer (level 3 T3 timer).

seconds

NT4CHBK1

The value of the waiting for changeover acknowledgment (first attempt) timer (level 3 T4 timer).

seconds

NT5CHBK2

The value of the waiting for changeover acknowledgment (second attempt) timer (level 3 T5 timer).

seconds

NT6TDCRR

The value of the delay to avoid mis-sequencing on controlled rerouting timer (level 3 T6 timer).

seconds

NT7SLKCN

The value of the waiting for signaling link connection acknowledgment timer (level 3 T7 timer).

seconds

NT8TRPRH

The value of the transfer prohibited inhibited timer (level 3 T8 timer).

seconds

NT10SRST

The value of the waiting to repeat signaling routeset test timer (level 3 T10 timer).

seconds

NT11TFRS

The value of the transfer restricted timer (level 3 T11 timer).

seconds

NT12UNAK

The value of the waiting for uninhibit timer (level 3 T12 timer).

seconds

NT13FUNH

The value of the waiting for force uninhibit timer (level 3 T13 timer).

seconds

NT14INAK

The value of the waiting for inhibition acknowledgment timer (level 3 T14 timer).

seconds

NT15RSCT

The value of the waiting for repeat signaling routeset congestion test timer (level 3 T15 timer).

seconds

NT16RSCS

The value of the waiting for routeset status update timer (level 3 T16 timer).

seconds

NT17REAL

The value of the delay to avoid oscillation of initial alignment failure and restart timer (level 3 T17 timer).

seconds

NT18TCLR

The value of the transfer cluster restricted interval timer (level 3 T18 timer).

seconds

NT19FLKR

The value of the failed link craft referral timer (level 3 T19 timer).

seconds

NT20RLIH

The value of the waiting to repeat local inhibit test timer (level 3 T20 timer).

seconds

NT21RRIH

The value of the waiting to repeat remote inhibit test timer (level 3 T21 timer).

seconds

NT22RSTL

The value of the restarting SP waiting for links to become available timer (level 3 T22 timer).

seconds

NT23WTRA

The value of the waiting after T22 to receive all TRAs timer (level 3 T23 timer).

seconds

NT24BTRA

The value of the restarting: waiting to broadcast all TRAs timer (level 3 T24 timer).

seconds

NT25WTRA

The value of the adjacent and restarting: waiting for TRA timer (level 3 T25 timer).

seconds

NT26RTRW

The value of the restarting: waiting to repeat TRW timer (level 3 T26 timer).

seconds

NT28WTRW

The value of the adjacent: waiting for TRW timer (level 3 T28 timer).

seconds

NT29RSUX

The value of the TRA sent, unexpected TRA, TRW, resumption timer (level 3 T29 timer).

seconds

NT30LMTF

The value of the limit TFPs/TFRs for unexpected TRAs/TRWs timer (level 3 T30 timer).

seconds

NT31FLCD

The value of the false link congestion detection timer (level 3 T31 timer).

seconds

NT32OSCA

The value of the link oscillation filter - procedure A timer (level 3 T32 timer).

seconds

PROCS

The number of configured cards that are in service normal (IS-NR) or in-service abnormal (IS-ANR).

peg count

STATUS

Indication of Data Validity:
  • K indicates good data
  • I indicates incomplete interval
  • N indicates data not current

status

STLOOP

The value of the supervision timer for circular route detection test timer (the value of the mtpltst parameter of the chg-stpopts command).

seconds

NTCRSCS

JT-Q.704/NTT-Q.704 Tc timer: To release (reset) transfer controlled status of a DPC in time controlled fashion.

seconds

UI Reports

UI Example Output:

    Tekelecstp 15-09-20 01:10:32 EST  EAGLE5 46.3.0.0.0-66.13.0
    TYPE OF REPORT: RECORD BASE MEASUREMENTS ON STP
    REPORT PERIOD: ACTIVE
    REPORT INTERVAL:  15-09-20,  01:10:32 THROUGH CURRENT

    STP-RBASE MEASUREMENTS

    PROCS      =        10, LNKSETS    =         6, LINKS      =         6,
    BUSS       =         2, NT1TDCHO   =       0.8, NT2CHOAK   =       1.4,
    NT3TDCHB   =       0.8, NT4CHBK1   =       0.8, NT5CHBK2   =       0.8,
    NT6TDCRR   =       0.8, NT7SLKCN   =         1, NT8TRPRH   =       0.8,
    NT10SRST   =        30, NT11TFRS   =        30, NT12UNAK   =       0.8,
    NT13FUNH   =       0.8, NT14INAK   =         2, NT15RSCT   =         3,
    NT16RSCS   =       1.4, NT17REAL   =       0.8, NT18TCLR   =        10,
    NT19FLKR   =       480, NT20RLIH   =        90, NT21RRIH   =        90,
    NT22RSTL   =        10, NT23WTRA   =        10, NT24BTRA   =        10,
    NT25WTRA   =        30, NT26RTRW   =        12, NT28WTRW   =         3,
    NT29RSUX   =        60, NT30LMTF   =        30, NT31FLCD   =        60,
    NT32OSCA   =        60, STLOOP     =        10, CTSDLSST   =        30,
    NTCRSCS    =         4

FTP Reports

FTP Example Output File Name: rbase-stp_20101005_1937.csv

FTP Example Output File Format:

"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"<cr><lf>
"tekelecstp","EAGLE5 46.3.0.0.0-66.13.0","2015-09-20","01:11:25","EST ","RECORD BASE MEASUREMENTS ON STP","ACTIVE","2015-09-20","01:11:25","01:11:25",1<cr><lf>
<cr><lf>
"STATUS","PROCS","LNKSETS","LINKS","BUSS","NT1TDCHO","NT2CHOAK","NT3TDCHB","NT4CHBK1","NT5CHBK2",​"NT6TDCRR","NT7SLKCN","NT8TRPRH","NT10SRST","NT11TFRS","NT12UNAK","NT13FUNH","NT14INAK",​"NT15RSCT","NT16RSCS","NT17REAL","NT18TCLR","NT19FLKR","NT20RLIH","NT21RRIH","NT22RSTL",​"NT23WTRA","NT24BTRA","NT25WTRA","NT26RTRW","NT28WTRW","NT29RSUX","NT30LMTF","NT31FLCD",​"NT32OSCA","STLOOP","CTSDLSST","NTCRSCS"<cr><lf>
"K",10,6,6,2,0.8,1.4,0.8,0.8,0.8,0.8,1,0.8,30,30,0.8,0.8,2,3,1.4,0.8,10,480,90,90,10,10,10,30,12,3,60,30,60,60,10,30,4<cr><lf>

Typical file size is:

Assuming each data line will be:

4 char status + 37 * (6 char data) + 2 = 228 chars

Table 3-211 Typical File Size: rbase-stp.csv

System header + Report header + Report data = File Size

250

+

404

+

228

=

882 bytes