Go to primary content
Oracle® Communications Measurements Reference
Release 46.6
E93320 Revision 1
Go To Table Of Contents
Contents

Previous
Previous

LNKSET MTCS Report

Command Examples

  • UI
    • rept-meas:type=mtcs:enttype=lnkset:lsn=ls1201
  • FTP
    • rept-ftp-meas:type=mtcs:enttype=lnkset

Measurement Events

Table 3-219 Maintenance Status Linkset Measurements

Event Name Description Unit

LKMTCST

Maintenance State

ACT link primary state is IS-NR and is or can be used to carry traffic.

UNAV - link has been made unavailable by local or centralized maintenance personnel (inhibited or canceled link or active local processor outage).

OOS – link out-of-service but can be made available by the STP.

ACTLINKS

Number of currently active links.

Number of links in the IS-NR (ACT) state.

UAVLINKS

Number of links in the unavailable maintenance state.

Number of links in the OOS-MT-DSBLD (UNAV) state.

OOSLINKS

Number of out-of-service links

Number of links in a maintenance state other than IS-NR and OOS-MT-DSBLD.

STATUS

Indication of Data Validity:
  • K indicates good data
  • I indicates incomplete interval
  • N indicates data not current

status

UI Reports

UI Example output:

  • Example of rept-meas:type=nm:enttype=lnkset:lsn=xxxx
        tekelecstp 12-02-21 04:44:56 EST  EAGLE5 44.0.0
        TYPE OF REPORT: MAINTENANCE STATUS INDICATORS ON LNKSET
        REPORT PERIOD: ACTIVE
        REPORT INTERVAL:  12-02-21,  04:44:56 THROUGH CURRENT
    
        LNKSET-MTCS MEASUREMENTS: gtwy    (MTP2)
    
        LSMTCST    =    'OOS', ACTLINKS   =         0, UAVLINKS   =         0,
        OOSLINKS   =         2
    
    ;
    

FTP Reports

FTP Example Output File Name: mtcs-lnkset_20101005_2126.csv

FTP Example Output File Format:

"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENT
IDS"<cr><lf>
"tekelecstp","EAGLE5 44.0.0-64.23.0","2012-02-21","04:45:44","EST ","MAINTENANCE STATUS 
INDICATORS ON LNKSET","ACTIVE","2012-02-21","04:45:44","04:45:44",7<cr><lf>
<cr><lf>
"STATUS","LSN","LNKTYPE","LSMTCST","ACTLINKS","UAVLINKS","OOSLINKS"<cr><lf>
"K","mtp2","MTP2","'UNAV'",0,1,0<cr><lf>
"K","ipsg","IPVL","'OOS'",0,0,1<cr><lf>
"K","m3uals","IPVL","'OOS'",0,0,1<cr><lf>
"K","hcmimt1","MTP2-UNCH","'OOS'",0,0,1<cr><lf>
"K","ssedcm2","IPVL","'OOS'",0,0,1<cr><lf>
"K","saal","SAAL","'OOS'",0,0,1<cr><lf>
"K","gtwy","MTP2","'OOS'",0,0,2<cr><lf>

Assuming each data line will be:

4 char status + 13 char LSN + 9 char LNKTYPE + 4*(6 char data) + 2 = 52 chars

Table 3-220 Typical File Size: mtcs-lnkset.csv

System header + Report header + Report data = File Size

250

+

70

+

26,000

=

26,320 bytes