0184 - 1116-PHS Clock Failed

This message indicates that the primary E1/T1 High Speed clock has failed for the TDM card located in slot 1116.

Example

station1234 99-03-05 16:28:08 EST  EAGLE 31.6.0 
*  0052.0184  * HS CLOCK SYSTEM  1116-PHS clock failed

Alarm Level: Minor

Recovery

1. Use the rept-stat-clk command to determine the current clock configuration.
   Example of the output:

   rept-stat-clk
       Command entered at terminal #3.
   ;
       tekelecstp 99-03-05 13:34:15 EST EAGLE 31.6.0
       CARD LOC= 1114 (Active   )       CARD LOC= 1116 (Isolated )
       PRIMARY BITS      = Active        PRIMARY BITS      = -----
       SECONDARY BITS    = Idle          SECONDARY BITS    = -----
       HS PRIMARY CLK    = Active        HS PRIMARY CLK    = -----
       HS SECONDARY CLK  = Idle          HS SECONDARY CLK  = -----
       HS CLK TYPE      = E1 UNFRAMED    HS CLK TYPE      = -----
       HS CLK LINELEN   = SHORTHAUL      HS CLK LINELEN   = -----
                                        PST           SST       AST
       SYSTEM CLOCK                     IS-NR         ACTIVE    ALMINH 
       ALARM STATUS     = No Alarms. 
       # Cards using CLK A = 009        # Cards with bad CLK A = 000
       # Cards using CLK B = 000        # Cards with bad CLK B = 009
       # Cards using CLK I = 000
                                        PST           SST       AST
       HS SYSTEM CLOCK                  IS-NR         ACTIVE    ALMINH 
       ALARM STATUS     = No Alarms. 
       # Cards using HSCLK A = 001      # Cards with bad HSCLK A = 000
       # Cards using HSCLK B = 000      # Cards with bad HSCLK B = 002
       # Cards using HSCLK I = 000
       Command Completed.

2. Reseat the TDM card in slot 1116.
3. If the problem persists, replace the TDM card in slot 1116.
   Refer to the Maintenance Manual for card removal/replacement procedures.