0338 - X-LIST space full-entry(s) discarded

This message indicates that the total number of dynamic status exception list (x-list) entries for cluster routing has exceeded the maximum number configured. No more entries can be added to the list. This can occur because the maximum number of x-list entries is set too low, the timer that eliminates x-list entries after a specified period is set too long, or the x-list needs to be culled.

Example

   RLGHNCXA21W 00-02-07 11:02:30 EST  EAGLE 35.0.0
*  0100.0338  **  XLIST            X-LIST space full-entry(s) discarded

Alarm Level: Major

Recovery

1. To display the system-wide parameters for cluster routing, enter the rtrv-stpopts command.
   Example of the output:

   
   RLGHNCXA03W  00-07-23  16:02:34 EST  EAGLE. 31.3.0   STP OPTIONS
   -------------------------
   MTPT31CTL               1
   MTPLT1                yes
   MTPLTCTDPCQ             3
   MTPLTST             10000
   MTPXLQ                500
   MTPXLET              0100
   MTPXLOT               90%
   MTPDPCQ              2000
   TFATFRPR             1000
   MTPRSI                yes
   MTPRSIT              5000
   

   The mtpxlq parameter is the total number of dynamic status exception list (x-list) entries the EAGLE 5 ISS maintains. There are 2500 total table entries. The default values allow for 2000 entries for provisioned destinations and 500 for x-list entries. (If you increase the number of x-list entries, you must decrease the number of DPCs that can be provisioned by changing the mtpdpcq parameter.) The mtpxlet parameter is the maximum amount of time the EAGLE 5 ISS maintains an unreferenced x-list entry.
2. Use the chg-stpopts to change the number of x-list entries or the x-list expiration timer.
3. If the problem persists, use the dact-rstst command to eliminate specific x-list entries.