0422 - Insufficient Extended Memory

At least one SCCP card does not have enough memory for the LNP application. Loading of the SCCP card is automatically inhibited.

Example

RLGHNCXA21W 00-02-07 11:02:30 EST  EAGLE 35.0.0
** 0100.0422 ** CARD  1113 SCCP  Insufficient extended memory
                HW VERIFICATION CODE: xxx

Alarm Level: Major

Recovery

1. If this message contains the optional line ‘HW VERIFICATION CODE: xxx’:
   1. Decode the xxx value and correct the indicated problem.
      See the Hardware Verification Codes in UAMs section on hardware verification codes in the Unsolicited Alarms and Information Messages manual.
   2. After correcting the problem, the card will be in out-of-service maintenance disabled state (OOS-MT-DSBLD).
      Restore the card back to in-service normal state (IS-NR) with the alw-card command. If this message does not contain the optional line ‘HW VERIFICATION CODE: xxx’, continue with the next step.
2. Verify the SCCP hardware.
   Verify the SCCP cards have at least 256M of memory.
3. If necessary, replace the SCCP card with the correct combination of motherboard and daughterboard.
   Refer to the Maintenance Manual for card removal/replacement procedures.