1090 - ITU GWY:CPC conversion failure

This message indicates a protocol conversion failure. There are three possible reasons for the conversion failure.

• The point code was not in the database.

• The appropriate point code type was unavailable. There is no true point code or alias point code that matches the CPC.

• The database is corrupted. The master database and the card database must be synchronized.

Example

station5 00-04-18 19:12:00 EST  EAGLE 31.3.0
0010.1090    CARD 1205,B  INFO  ITU GWY: CPC conversion failure
SIO=0a   OPC=3-236-1  DPC=1-014-2
CPC=3-095-6  
LSN=A1234567890

Legend

CPC

Capability point code

DPC

Destination point code

LSN

Linkset name. The name must be unique.

OPC

Origination point code

SIO

Service information octet

Alarm Level: No alarm condition. The message is informational only.

Recovery

1. Check the database to make sure the card database is synchronized with the master database.
   Enter the rept-stat-db:display=except command. If the databases are not synchronized, reload the card data by initializing the card. If the databases are synchronized, go to Step 2.
2. Enter the rtrv-dstn:dpccommand.
   If the rtrv-dstn command fails, the point code is undefined or the destination point code is an alias and not a true point code.
3. To verify that the point code is an alias, enter the rtrv-dstn:alias command.
   If the command succeeds, you must provision the database with the true point code using the chg-dstn:dpc=xxx:alias=yyycommand.
4. If the point code is not an alias, you must define the point code using the ent-dstn:dpci=xxx:aliasi=yyy command.
5. Check translations on the originating switch to determine the trouble.