1195 - SCCP did not route - DPC/SS not in mapset
The SCCP did not route a message because the destination point code and destination subsystem was not in the mapset. The message was discarded.
Example
This output indicates an error against the original
destination rather than the redirected destination.
RLGHNCXA21W 02-07-21 16:20:19 EST EAGLE 37.5.0
0018.1195 CARD 1103,A INFO SCCP did not route - DPC/SS not in mapset
TRANSLATED PC=003-003-003 TRANSLATED SS=005
CDPA: NI=1 RI=0 GTI=04 SSNI=0 PCI=1
TT=250 NP=04 NAI=010 ADDR=123456789012345678901
PC=003-003-003 SSN=005
CGPA: NI=1 RI=0 GTI=04 SSNI=0 PCI=1
TT=100 NP=07 NAI=012 ADDR=012345678901234567890
PC=001-001-001 SSN=004
LSN=ABCD123 GTTSET=3 (8)
Report Date:02-07-21 Time:16:20:19
This alternate output includes the redirected destination and is
used when a redirected MSU encounters an error.
RLGHNCXA21W 02-07-21 16:20:19 EST EAGLE 37.5.0
0018.1195 CARD 1103,A INFO SCCP did not route - DPC/SS not in mapset
TRANSLATED PC=003-003-003 TRANSLATED SS=005
GTT on CdPA used MOSMSGTA=9193802053
CDPA: NI=1 RI=0 GTI=04 SSNI=0 PCI=1
TT=250 NP=04 NAI=010 ADDR=123456789012345678901
PC=003-003-003 SSN=005
CGPA: NI=1 RI=0 GTI=04 SSNI=0 PCI=1
TT=100 NP=07 NAI=012 ADDR=012345678901234567890
PC=001-001-001 SSN=004
LSN=ABCD123 GTTSET=3 (8)
Report Date:02-07-21 Time:16:20:19
Legend
- ADD
- Address
- CDPA
- Called party address
- CGPA
- Calling party address
- GTI
- Global title indicator
- GTTSET
- GTT Set Index
- LSN
- Linkset name
- NAI
- Nature of address indictor
- NI
- Network indicator value
- NP
- Numbering plan
- PC
- Point code
- PCI
- Point code indicator
- RI
- Routing indicator
- SSN
- Subsystem number
- SSNI
- Subsystem number indicator
- TT
- Translation type
- TRANSLATED PC
- Translated point code
- TRANSLATED SS
- Translated subsystem
Note:
If Global Title Translation is found, the GTTSET in which the translation is found appears. If Global Title Translation is not found, the GTTSET does not display.
Alarm Level: No alarm condition. The message is informational only.
Recovery
- If the DPC/SS indicated in the message should not be routed to, no further action is necessary.
- If the DPC/SS should be routed to from the EAGLE 5
ISS, use the
ent-map
command to enter the DPC/SS into the mapset (obtained as outcome of GT translation, with which load sharing is desired) in the MAP table.