Go to main content

Oracle® VM Server for SPARC 3.6 Administration Guide

Exit Print View

Updated: September 2019
 
 

How to Set the Virtual Switch Mode to Remote

  1. Determine whether the inter-vnet-link property is set to off.
    primary#  ldm list -e domain-name
    VSW
    
        NAME         MACADDRESS        NET-DEV  DVID|PVID|VIDs
        ----         ----------        -------  --------------
        primary-vsw0 00:14:4f:fb:86:af net0     1|1|--
                ....
                INTER-VNET-LINK :on/auto              MODE :--
                VSW-RELAY-MODE  :local
  2. Disable inter-vnet LDC channels if the inter-vnet-link value is auto or on.
    primary# ldm set-vsw inter-vnet-link=off primary-vsw0
  3. Set the vsw-relay-mode property value to remote.
    primary# ldm set-vsw vsw-relay-mode=remote primary-vsw0
  4. Verify that the vsw-relay-mode property is set to remote.
    primary#  ldm list -e domain-name
    VSW
    
        NAME         MACADDRESS          NET-DEV   DVID|PVID|VIDs
        ----         ----------          -------   --------------
        primary-vsw0 00:14:4f:fb:86:af   net0      1|1|--
                ....
                INTER-VNET-LINK :off              MODE :--
                VSW-RELAY-MODE  :remote