About this Guide

The ACLI Configuration Guide provides information about:

  • Basic concepts that apply to the key features and abilities of your Oracle Communications Session Border Controller
  • Information about how to load the Oracle Communications Session Border Controller system software image you want to use and establish basic operating parameters
  • System-level functionality for the Oracle Communications Session Border Controller
  • Configuration of all components of the Oracle Communications Session Border Controller

Oracle Accessibility

For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website at http://www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc .

Related Documentation

The following table lists the members that comprise the documentation set for this release:

Document Name Document Description
Acme Packet 3900 Hardware Installation Guide Contains information about the components and installation of the Acme Packet 3900.
Acme Packet 4600 Hardware Installation Guide Contains information about the components and installation of the Acme Packet 4600.
Acme Packet 6100 Hardware Installation Guide Contains information about the components and installation of the Acme Packet 6100.
Acme Packet 6300 Hardware Installation Guide Contains information about the components and installation of the Acme Packet 6300.
Acme Packet 6350 Hardware Installation Guide Contains information about the components and installation of the Acme Packet 6350.
Release Notes Contains information about the current documentation set release, including new features and management changes.
ACLI Configuration Guide Contains information about the administration and software configuration of the Service Provider Oracle Communications Session Border Controller.
ACLI Reference Guide Contains explanations of how to use the ACLI, as an alphabetical listings and descriptions of all ACLI commands and configuration parameters.
Maintenance and Troubleshooting Guide Contains information about Oracle Communications Session Border Controller logs, performance announcements, system management, inventory management, upgrades, working with configurations, and managing backups and archives.
MIB Reference Guide Contains information about Management Information Base (MIBs), Oracle Communication's enterprise MIBs, general trap information, including specific details about standard traps and enterprise traps, Simple Network Management Protocol (SNMP) GET query information (including standard and enterprise SNMP GET query names, object identifier names and numbers, and descriptions), examples of scalar and table objects.
Accounting Guide Contains information about the Oracle Communications Session Border Controller’s accounting support, including details about RADIUS and Diameter accounting.
HDR Resource Guide Contains information about the Oracle Communications Session Border Controller’s Historical Data Recording (HDR) feature. This guide includes HDR configuration and system-wide statistical information.
Administrative Security Essentials Contains information about the Oracle Communications Session Border Controller’s support for its Administrative Security license.
Security Guide Contains information about security considerations and best practices from a network and application security perspective for the Oracle Communications Session Border Controller family of products.
Installation and Platform Preparation Guide Contains information about upgrading system images and any pre-boot system provisioning.
Call Traffic Monitoring Guide Contains information about traffic monitoring and packet traces as collected on the system. This guide also includes WebGUI configuration used for the SIP Monitor and Trace application.
Header Manipulation Rule Guide Contains information about configuring and using Header Manipulation Rules to manage service traffic.

Revision History

Table -1 Revision History

Date Description
April 2018
  • Initial release
May 2018
  • Updates the "forwarding-cores" and "transcoding-cores" parameters for accuracy.
  • Removes the ARCFOUR cipher from the "The SBC and TLS" topic.
  • Updates "Supported Encryption".
  • Adds "Supported DTLS Encryption for TSM" to the "Tunneled Services Control Function" chapter.
June 2018
  • Adds option for supporting released media that is subsequently hairpinned
  • Removes some TACACs per-message definitions that duplicate IETF standards documentation.
  • Updates the "Incremental QoS Updates" section to include a note that comm-monitor VQ reports do not support disabling latching for a stream.
  • Adds the "Note" to "enabled" in the REFER Source Routing" topic.
September 2018
  • Adds M1 content
  • Adds the note about the mm-in-realm parameter to the "Replaces Header Support" topic.
  • Moves AMR content from IWF to Transcoding
  • Updates "Boot Parameter Definitions" to include the Acme Packet 3900 in the VLAN definition.
October 2018
  • Corrects sub-element reference name syslog-config
  • Adds management server configuration to RADIUS backup procedures
  • Clarifies that the external policy server's realm value is used for origin-realm and origin-host AVPs, even when configured for policy server groups
  • Removes reference to configuring sip-interfaces with refer-call-transfer
  • Clarifies trunk group configuration
  • Corrects max-register-forward option description as controlling refreshes
  • Corrects IP Address boot parameter name
  • Clarifies reboot requirement after entitlement configuration
  • Removes references to ETC hardware
  • Compatibility mode does not support TLS1.0 by default.
November 2018
  • Removed incorrect comment about bootflags resetting to zero during a reboot if R226 entitlement is set.
December 2018
  • Adds availability qualification for fragment-msg-bandwidth
February 2019
  • Removes HMR topics duplicated in Header Manipulation Rules Resource Guide.
  • Updates "Incremental QoS Updates" to remove inaccurate platform support information.
May 2019
  • Updates "SIP PRACK Interworking" section for accuracy.
  • Adds add-sdp-baseBehavior option
  • Adds fix-missing-m-lines option
  • Adds strip-restored-sdp option
  • Corrects typo in SRTP title
  • Clarifies interaction of nat-interval parameter with Adaptive HNT
  • Clarifies recursion policy's use of global count parameter
  • Adds mode 3 to tcp-keepalive-mode parameter
June 2019
  • Adds Daylong Transcoding Session Cleanup feature to Transcoding chapter.
  • Adds requirement to reboot after CPU configuration changes
  • Adds feature interaction list that invalidates reactive transcoding
  • Adds note indicating NTP is not supported over wancom0 when configured for a VLAN
July 2019
  • Updates RTCP Generation Platform Support section.
November 2019
  • Updates "AA-Request (AAR) Command" section.
  • Adds warning not to reboot when using media interface peercheck
February 2020
  • Corrects session-agent max-burst-rate description
Previous
Previous 		Next
Next
Go To Table Of Contents
Contents