| Oracle® Communications EAGLE Commands Error Recovery Reference Release 46.7 E97329 Revision 1 |
|
 Previous |
 Next |
| Oracle® Communications EAGLE Commands Error Recovery Reference Release 46.7 E97329 Revision 1 |
|
|
Previous |
Next |
For the
clr-imt-stats and
rept-imt-lvl2 commands, the
s/e or
sloc/eloc parameter combination must
be specified.
For the
ent/chg-e1 and
ent/chg-t1 commands, if the
linkclass=unchan parameter is
specified, then the
chanbrdg=on or
cas=on parameters cannot be
specified. The
linkclass=unchan parameter must be
specified before the
minsurate parameter can be
specified.
For the
ent/chg-ls commands, ITUTFR cannot be
specified for a link set to be configured for APCN16.
For the
ent-ip-conn command, the
rhost and
rport must be specified with
prot=tcp/udp.
For the
rept-gb-lvl2 command, if the
sloc or
eloc parameter is specified, then
the
loc parameter cannot be specified.
For the
rept-imt-lvl1 command, the
s/e, sloc/eloc, and
sshelf/eshelf parameter combinations
cannot be specified together.
For the
rtrv-dconn command, multiple
combinations of optional parameters are not allowed.
For the
rtrv-gttset command, if the
setidx parameter is specified, then
no other parameter can be specified; if the
npsn parameter is specified, then only
settype cane be specified; if the
gttsn parameter is specified, then
the
settype, netdom, actsn,
gtmodid, and
sxudt parameters cannot be specified.
For the
rtrv-ip-host command, the
Display=all and
realm parameters must not be
specified together.
For the tst-imt
command, if the
type=faulttest parameter is
specified, then the
time,
maxerr, and
action parameters cannot be
specified. If the
action=stop parameter is specified,
then the
time and
maxerr parameters cannot be
specified.
Recovery
Re-enter the command that generated this error message, specifying a valid combination of parameters. Refer to the command description in Commands User's Guide for assistance.
