Go to primary content
Oracle® Communications EAGLE Commands Error Recovery Reference
Release 46.7
E97329 Revision 1
Go To Table Of Contents
Contents

Previous
Previous
Next
Next

E3006 Cmd Rej: Hex Digit Support for GTT feature must be ON

For the chg-gsmsmsopts command, the Hex Digit Support for GTT feature must be turned on before hexadecimal values can be specified for the mosmsgta parameter.

For the ent/chg/dlt/rtrv-gta commands, the Hex Digit Support for GTT feature must be turned on before hexadecimal values can be specified for the gta/saddr and egta/eaddr parameters.

For the ent/chg/rtrv-gtt commands, the Hex Digit Support for GTT feature must be turned on before hexadecimal values can be specified for the gta and egta parameters.

For the ent/chg/rtrv-gtmod commands, the Hex Digit Support for GTT feature must be turned on before hexadecimal digits can be specified for the npds and nsds parameters.

Recovery

  1. Display the status of the Hex Digit Support for GTT feature. Enter the rtrv-ctrl-feat command.
    If the feature does not appear in the output, then the feature is not enabled. If the feature has a status of OFF, then the feature is enabled but is not turned on.
  2. Enable and turn on the feature as necessary. Refer to the Database Administration - GTT User's Guide for assistance.
  3. Re-enter the command that generated this error message.