E2144 Cmd Rej: Location invalid for hardware configuration

A card must be equipped and must be in the appropriate location for the card type. Refer to Commands User's Guide for information about the card requirements for a particular command.

For the chg-ee-card and rept-stat-ee commands, the value specified for the loc parameter does not have Eagle Eyes service capability.

For the chg-gedti-card command, the value specified for the loc parameter must correspond to the location of a card provisioned as an IPSM card.

For the dact-gedti command, the value specified for the loc parameter must refer to an equipped card location.

For the disp-tbl and set-tbl commands, the 1117 location is used by E5-MDAL cards, the 1113 and 1115 locations are used by E5-MCAP cards, and the 1114 and 1116 locations are used by E5-TDM cards.

For the ent-card command, the n+1 slot next to the SM or HC-MIM card must be empty, where n is the odd-numbered location (for example, if the SM card is in location 1101, then the 1102 slot must be empty and not provisioned).

For the rept-stat-card command, the card location specified by the loc parameter must be equipped.

For the rept-stat-sflog command, the shelf and card must be equipped.

For the rept-stat-deir command, the card at the specified location does not support this command.

For the rept-stat-enum command, the shelf and card must be equipped, and the card specified by the loc parameter must have an application of enumhc.

For the rtrv-card command, the specified card location must be equipped in the database.

Recovery

1. Display the cards in the database. Enter the rtrv-card command.
2. Re-enter the command that generated this error message, specifying a valid card location. Refer to Commands User's Guide for more information about the card requirements for each command.

   Contact My Oracle Support if this error message appears again. See My Oracle Support (MOS).