LNKSET RBASE Report

Command Examples

UI
- rept-meas:type=rbase:enttype=lnkset:lsn=1201a
FTP
- rept-ftp-meas:type=rbase:enttype=lnkset

Measurement Events

Table 3-215 Record Base Linkset Measurements

Event Name	Description	Unit
LINKS	The number of configured signaling links.	peg count
RCLKBFRS	The number of receiving link buffers. The number of receiving link buffers is always 1 for each signaling link, so a value of 1 is always reported for this register.	peg count
ST01SLTA	Supervision timer for SLTA.	seconds
ST02SLTI	SLT interval timer.	seconds
STATUS	Indication of Data Validity: K indicates good data I indicates incomplete interval N indicates data not current	status

UI Reports

rept-meas:type=nm:enttype=lnkset:lsn=xxxx

    tekelecstp 12-02-21 01:14:30 EST  EAGLE5 44.0.0
    TYPE OF REPORT: RECORD BASE MEASUREMENTS ON LNKSET
    REPORT PERIOD: ACTIVE
    REPORT INTERVAL:  12-02-21,  01:14:30 THROUGH CURRENT

    LNKSET-RBASE MEASUREMENTS: mtp2    (MTP2)

    LINKS      =         1, RCLKBFRS   =         1, ST01SLTA   =         4,
    ST02SLTI   =        30

;


    tekelecstp1 12-03-22 19:12:04 EST  EAGLE5 44.0.0
    TYPE OF REPORT: RECORD BASE MEASUREMENTS ON LNKSET
    REPORT PERIOD: ACTIVE
    REPORT INTERVAL:  12-03-22,  19:12:04 THROUGH CURRENT

    LNKSET-RBASE MEASUREMENTS: ipsg    (IPVL)

    LINKS      =         1, RCLKBFRS   =         1

;


    tekelecstp1 12-03-22 19:12:09 EST  EAGLE5 44.0.0
    TYPE OF REPORT: RECORD BASE MEASUREMENTS ON LNKSET
    REPORT PERIOD: ACTIVE
    REPORT INTERVAL:  12-03-22,  19:12:09 THROUGH CURRENT

    LNKSET-RBASE MEASUREMENTS: saal    (SAAL)

    LINKS      =         1, RCLKBFRS   =         1, ST01SLTA   =         4,
    ST02SLTI   =        30

;


    tekelecstp 12-02-21 01:15:52 EST  EAGLE5 44.0.0
    TYPE OF REPORT: RECORD BASE MEASUREMENTS ON LNKSET
    REPORT PERIOD: ACTIVE
    REPORT INTERVAL:  12-02-21,  01:15:52 THROUGH CURRENT

    LNKSET-RBASE MEASUREMENTS: hcmimt1    (MTP2-UNCH)

    LINKS      =         1, RCLKBFRS   =         1, ST01SLTA   =         4,
    ST02SLTI   =        30

;

FTP Reports

FTP Example Output File Name: rbase-lnkset_20101005_1941.csv

FTP Example Output File Format:

"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENT
IDS"<cr><lf>
"tekelecstp","EAGLE5 44.0.0-64.23.0","2012-02-21","01:17:12","EST ","RECORD BASE MEASUREMENTS ON 
LNKSET","ACTIVE","2012-02-21","01:17:12","01:17:12",6<cr><lf>
<cr><lf>
"STATUS","LSN","LNKTYPE","LINKS","RCLKBFRS","ST01SLTA","ST02SLTI"<cr><lf>
"K","mtp2","MTP2",1,1,4,30<cr><lf>
"K","ipsg","IPVL",1,1,0,0<cr><lf>
"K","m3uals","IPVL",1,1,0,0<cr><lf>
"K","hcmimt1","MTP2-UNCH",1,1,4,30<cr><lf>
"K","ssedcm2","IPVL",1,1,0,0<cr><lf>
"K","saal","SAAL",1,1,4,30<cr><lf>

Assuming each data line will be:

4 char status + 13 char LSN + 12 char LNKTYPE + 4*(6 char data) + 2 = 55 chars

Table 3-216 Typical File Size: rbase-lnkset.csv

System header	+	Report header	+	Report data	=	File Size
250	+	68	+	33,000	=	33,318 bytes