LNKSET MTCD Report

Command Examples

FTP example command:
- rept-ftp-meas:type=mtcd:enttype=lnkset

Measurement Events

Table 3-61 Daily Maintenance (MTCD) and Day-to-Hour Maintenance (MTCDTH) Linkset Measurements

Event Name	Description	Unit
SCCPLOOP	The total number of times that a GTT translation matched a Point Code in the STP’s loopset entries resulting in either a notify or discard of an SCCP message.	peg count
STATUS	Indication of Data Validity: K indicates good data I indicates incomplete interval N indicates data not current	status
ZTTMAPI	Translation Type Mapping Translation Performed - MSUs Received on the Gateway Linkset - The total number of Translation Type Mapping translations performed for incoming Message Signal Units (MSUs) received on the specified linkset.	peg count
ZTTMAPO	Translation Type Mapping Translation Performed - MSUs Transmitted on the Gateway Linkset - The total number of translations performed on outgoing Message Signal Units (MSUs) for the specified linkset.	peg count

UI Reports

rept-meas:type=mtcd:enttype=lnkset:lsn=xxxx

    tekelecstp 12-02-12 00:07:51 EST  EAGLE5 44.0.0
    TYPE OF REPORT: DAILY MAINTENANCE MEASUREMENTS ON LNKSET
    REPORT PERIOD: LAST
    REPORT INTERVAL:  12-02-11  00:00:00 THRU 23:59:59

    LNKSET-MTCD MEASUREMENTS: mtp2    (MTP2)

    ZTTMAPO    =         0, ZTTMAPI    =         0, SCCPLOOP   =         0

;

    tekelecstp 12-02-12 00:07:52 EST  EAGLE5 44.0.0
    LNKSET-MTCD MEASUREMENTS: ipsg    (IPVL)

    ZTTMAPO    =         0, ZTTMAPI    =         0, SCCPLOOP   =         0

;

    tekelecstp 12-02-12 00:07:53 EST  EAGLE5 44.0.0
    LNKSET-MTCD MEASUREMENTS: ssedcm1    (IPVHSL)

    ZTTMAPO    =         0, ZTTMAPI    =         0, SCCPLOOP   =         0

;

    tekelecstp 12-02-12 00:07:54 EST  EAGLE5 44.0.0
    LNKSET-MTCD MEASUREMENTS: saal    (SAAL)

    ZTTMAPO    =         0, ZTTMAPI    =         0, SCCPLOOP   =         0

;

    tekelecstp 12-02-12 00:07:55 EST  EAGLE5 44.0.0
    LNKSET-MTCD MEASUREMENTS: hcmimt1    (MTP2-UNCH)

    ZTTMAPO    =         0, ZTTMAPI    =         0, SCCPLOOP   =         0

;

FTP Reports

FTP Example Output File Name: mtcd-lnkset_20101004_2400.csv

FTP Example Output File Format:

"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENT
IDS"<cr><lf>
"tekelecstp","EAGLE5 44.0.0-64.23.0","2012-02-12","00:28:19","EST ","DAILY MAINTENANCE
 MEASUREMENTS ON LNKSET","LAST","2012-02-11","00:00:00","24:00:00",5<cr><lf>

"STATUS","LSN","LNKTYPE","ZTTMAPO","ZTTMAPI","SCCPLOOP"<cr><lf>
"K","mtp2","MTP2",0,0,0<cr><lf>
"K","ipsg","IPVL",0,0,0<cr><lf>
"K","ssedcm1","IPVHSL",0,0,0<cr><lf>
"K","saal","SAAL",0,0,0<cr><lf>
"K","hcmimt1","MTP2-UNCH",0,0,0<cr><lf>

Assuming each data line will be:

4 char status + 13 char LSN + 12 char LNKTYPE + 3*(6 char data) + 2 = 49 chars

Table 3-62 Typical File Size: mtcd-lnkset.csv

System header	+	Report header	+	Report data	=	File Size
250	+	58	+	24,500	=	24,808 bytes