CGTT SYSTOT Report

These measurements are used to monitor the overall performance of the STP.

The system total CGTT report requires the Origin Based SCCP Routing feature to be enabled or FLOBR feature to be activated. The entity type for CGTT reports reuses TT.When a GTT Actions feature is on with OBSR feature (which does translation based on the Calling Party), the GTT measurements that have names beginning with CGGTT (such as CGGTADISC0) are updated.

Note:

The CGTT registers in the SYSTOT-CGTT report are pegged only if the GTT Translation mode is either FLOBR_CGPA (FG) or CGPA. The GTT Translation mode is determined by the GTTMODE parameter in the rtrv-ls command. When the GTTMODE is System default (SysDflt), the mode is determined from the DFLTGTTMODE option of the SCCPOPTS table.

Example Commands:

UI: rept-meas:type=systot:enttype=tt

FTP: rept-ftp-meas:type=systot:enttype=tt

Table 3-5 Calling Party GTT Measurements

Event Name	Description	Unit
CGTTPERFD	CgPAGTTs Performed - The total number of MSUs that successfully passed CgPA global title translation (GTT)(CgPA GTA, CgPA PC, or OPC). This register is pegged only when the CgPA TT is present in the MSU. Since GTT can be done on the CgPA PC or on the OPC, the CgPA GTA is not a pre-requisite to perform GTT. This register appears in the SYSTOT-CGTT report ONLY, which is only generated if the Origin Based SCCP Routing feature is enabled or FLOBR feature is turned on.	peg count
CGGTTADISC0GTTADISC0	GTT Actions – MSUs Discarded - The total number of messages discarded by the DISCARD GTT Action.	peg count
CGGTTADISC1GTTADISC1	GTT Actions – MSUs Discarded - The total number of messages discarded by the UDTS GTT Action.	peg count
CGGTTADISC2GTTADISC2	GTT Actions – MSUs Discarded - The total number of messages discarded by the TCAP Error GTT Action	peg count
CGGTTADUPGTTADUP	GTT Actions – MSUs Duplicated - The total number of messages for which Duplicate MSU was sent. Multiple duplicate actions in an action set shall also increment this register only once.	peg count
CGGTTAFWDGTTAFWD	GTT Actions – MSUs Forwarded - The total number of messages forwarded by Forward GTT Action.	peg count
CGGTTASETGTTASET	GTT Actions - The total number of messages receiving any GTT action.	peg count
GTTUN0NS	CgPAGTTs Unable to Perform - Diagnostic 0: CgPA selectors not found - The total number of times that the specified type of translation in an MSU was not supported by the STP. This register counts MSUs for which CgPA selectors were not found. This register appears in the SYSTOT-CGTT report ONLY, which is only generated if the Origin Based SCCP Routing feature is enabled or FLOBR feature is turned on.	peg count
CGGTTUN1NT	Origin Based GTTs Unable to Perform - Diagnostic 1: - The number of times that a match for the global title or point code could not be found in the translation table because: Translation not found in CgPA GTA GTTSET or in CgPA PC GTTSET or in OPC GTTSET. GTT on CgPA PC is required, but CgPA PC is not present in the MSU. This register is pegged when the CgPA TT is present in the MSU. Since GTT can be done on the CgPA PC or on the OPC, the CgPA GTA is not a pre-requisite to perform GTT. This register shall also be pegged, if FLOBR CgPA gttmode is used, and translation is not successful for any of the following reasons: maximum search depth is reached duplicate GTTSET type is encountered translation not found (any GTTSET type) CdPA SSN required, but not present in the MSU CgPA SSN required, but not present in the MSU CgPA PC required, but not present in the MSU Default CgPA PC Set is required, but not provisioned (ANSI or ITU) This register appears in the SYSTOT-CGTT report ONLY, which is only generated if the Origin Based SCCP Routing feature is enabled or FLOBR feature is turned on.	peg count
FCGGTTPRFD	FLOBR CGPA GTTs Performed - The total number of MSUs that successfully completed Flexible CgPA Global Title Translation. This register appears in the SYSTOT-CGTT report ONLY, which is only generated if theOrigin Based SCCP Routing feature is enabled or FLOBR feature is turned on.	peg count
CGGTTSRGFLX	The total number of messages serviced by GFLEX GTT Action.	peg count
CGGTTSRGPRT	The total number of messages serviced by GPORT GTT Action.	peg count
CGGTTSRSMSR	The total number of messages serviced by SMSMR GTT Action.	peg count
CGGTTASFLOG	The total number of messages serviced by SFLOG GTT Action.	peg count
CGGTTAMSVTO	The total number of messages that successfully pass SCPVAL GTT Action.	peg count
CGGTTAMSVDI	The total number of messages discarded by SCPVAL GTT Action.	peg count
CGGTTAMSVNA	The total number of messages where validation was not applied by SCPVAL GTT Action.	peg count
CGGTTONSM	Total number of messages on which GTT is performed only on SCCP cards (per CGTT).	peg count
CGGTTONLIM	Total number of messages on which GTT is performed only on GTT enabled IPSG cards (per CGTT).	peg count
CGTMULTCOMP	Total number of messages where more than one component was searched for an OPCODE translation, even if no matching translation was found (per CGTT).	peg count
STATUS	Indication of Data Validity K – indicates good data I – indicates incomplete interval; N – indicates data not current.	status

UI Example Output:

    tekelecstp 15-09-06 22:34:19 EST  EAGLE5 46.3.0.0.0-66.11.0
    TYPE OF REPORT: STP SYSTEM TOTAL MEASUREMENTS ON CGTT
    REPORT PERIOD: LAST
    REPORT INTERVAL:  15-09-06,  22:00:00 THROUGH 22:29:59

    CGTT-SYSTOT MEASUREMENTS: CGTT: 1

    These measurements are from 15-09-06, 22:00:00 through 22:29:59.
    CGGTTPERFD =         0, CGGTTUN0NS =         0, CGGTTUN1NT =         0,
    FCGGTTPRFD =         0, CGGTTADISC0=         0, CGGTTADISC1=         0,
    CGGTTADISC2=         0, CGGTTADUP  =         0, CGGTTAFWD  =         0,
    CGGTTASET  =         0, CGGTTSRGFLX=         0, CGGTTSRGPRT=         0,
    CGGTTSRSMSR=         0, CGGTTASFLOG=         0, CGGTTAMSVTO=         0,
    CGGTTAMSVDI=         0, CGGTTAMSVNA=         0

;

FTP Example Output File Name:systot-cgtt_20020124_2230.csv

FTP Example Output File Format:

"CLLI","SWREL","RPTDATE","RPTIME","TZ","RPTTYPE","RPTPD","IVALDATE","IVALSTART","IVALEND","NUMENTIDS"
"tekelecstp","EAGLE5 46.3.0.0.0-66.11.0","2014-01-24","22:33:34","EST ","STP SYSTEM TOTAL MEASUREMENTS ON CGTT","LAST","2014-01-24","22:00:00","22:30:00",256

"STATUS","TT","CGGTTPERFD","CGGTTUN0NS","CGGTTUN1NT","FCGGTTPRFD","CGGTTADISC0","CGGTTADISC1","CGGTTADISC2",
"CGGTTADUP","CGGTTAFWD","CGGTTASET","CGGTTSRGFLX","CGGTTSRGPRT","CGGTTSRSMSR","CGGTTASFLOG","CGGTTAMSVTO","CGGTTAMSVDI","CGGTTAMSVNA"
"K","0",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
. . . . .

"K","255",0,0,0,0,0,0,0,0,0,0,0,0,0

Assuming each data line will be:

4 char status + 4 char TT + 17 * (6 char data) + 2 = 112 chars

For a report of 256 TTs, example typical file size:

Table 3-6 Typical File Size: systot-cgtt.csv

System header	+	Report header	+	Report data	=	File Size
250	+	244	+	28,672	=	29,166 bytes