0099 - Incompatible HW for Provisioned Slot

An MPL card is in a slot provisioned for a different card type and application. The card is automatically inhibited.

Example
RLGHNCXA21W 00-02-07 11:02:30 EST  EAGLE 35.0.0
** 0100.0099  ** CARD 1201  SS7ANSI  Incompatible HW for provisioned slot
                HW VERIFICATION CODE: xxx

Alarm Level: Major

Recovery

  1. If this message contains the optional line HW VERIFICATION CODE: xxx:
    1. See Hardware Verification Codes in UAMs the section on hardware verification codes in the Unsolicited Alarms and Information Messages manual and decode the xxx value.
      Correct the indicated problem. A card with Verification Code 002, 003, 004, or 102 may possibly begin to boot continually before this alarm is displayed.
    2. After correcting the problem, the card will be in out-of-service maintenance-disabled state (OOS-MT-DSBLD).
      Restore the card back to in-service normal state (IS-NR) with the alw-card command.
  2. If this message does not contain the optional line ‘HWVERIFICATIONCODE: xxx’, perform either of the following steps:
    1. Replace the MPL card with a DCM card.
      Refer to the Maintenance Manual for card removal/replacement procedures.
    2. Re-provision the slot for a LIMDS0 card.
      Refer to the Database Administration Manual - System Management manual for the correct procedures.