0546 - SEAS Terminal Unavailable

This message indicates that the EAGLE 5 ISS system is unable to communicate with the SEAS subsystem.

Example
RLGHNCXA21W 00-02-07 11:02:30 EST  EAGLE 37.5.0
*   0043.0546 ** TERMINAL   17          SEAS Terminal Unavailable

Alarm Level: Major

Recovery

  1. Enter the following command to determine the status of the SEAS terminal(s):
    rept-stat-seas
    Following are some examples of possible outputs:
    • Both Terminals Down (Duplex)
      > rept-stat-seas 
      
          tekelecstp 20-01-16 12:50:00 GMT  UNKNOWN ??.?.?-58.32.0 
          rept-stat-seas 
          Command entered at terminal #25. 
      ; 
      
      Command Accepted - Processing 
          tekelecstp 20-01-16 12:50:00 GMT  UNKNOWN ??.?.?-58.32.0 
          SEAS SYSTEM                                 PST           SST       AST 
          ------------------------------------------------------------------------- 
                                                      OOS-MT        Fault     ----- 
      
          ALARM STATUS = *C 0349 SEAS unavailable 
      
          TERM           IPADDR           PORT        PST           SST       AST 
          ------------------------------------------------------------------------- 
          26             192.168.63.235   1600        OOS-MT        Disc      ----- 
      
          ALARM STATUS = ** 0546 SEAS Terminal unavailable 
      
          24             192.168.63.235   1700        OOS-MT        Disc      ----- 
      
          ALARM STATUS = ** 0546 SEAS Terminal unavailable 
      
      
          Command Completed.
    • One Terminal Up (Duplex)
      > rept-stat-seas 
      
          tekelecstp 20-01-16 12:50:00 GMT  UNKNOWN ??.?.?-58.32.0 
          rept-stat-seas 
          Command entered at terminal #25. 
      ; 
      
      Command Accepted - Processing 
          tekelecstp 20-01-16 12:50:00 GMT  UNKNOWN ??.?.?-58.32.0 
          SEAS SYSTEM                                 PST           SST       AST 
          ------------------------------------------------------------------------- 
                                                      IS-ANR        Restrict  ----- 
      
          ALARM STATUS = ** 0348 SEAS is at min service limit 
      
          TERM           IPADDR           PORT        PST           SST       AST 
          ------------------------------------------------------------------------- 
          26             192.168.63.235   1600        IS-NR         Active    ----- 
      
          ALARM STATUS = No Alarms. 
      
          24             192.168.63.235   1700        OOS-MT        Disc      ----- 
      
          ALARM STATUS = ** 0546 SEAS Terminal unavailable 
      
      
          Command Completed.
    • One Terminal Down (Simplex)
      > rept-stat-seas 
      
          tekelecstp 20-01-16 12:50:00 GMT  UNKNOWN ??.?.?-58.32.0 
          rept-stat-seas 
          Command entered at terminal #25. 
      ; 
      
      Command Accepted - Processing 
          tekelecstp 20-01-16 12:50:00 GMT  UNKNOWN ??.?.?-58.32.0 
          SEAS SYSTEM                                 PST           SST       AST 
          ------------------------------------------------------------------------- 
                                                      OOS-MT        Fault     ----- 
      
          ALARM STATUS = *C 0349 SEAS unavailable 
      
          TERM           IPADDR           PORT        PST           SST       AST 
          ------------------------------------------------------------------------- 
          26             192.168.63.235   1600        OOS-MT        Disc      ----- 
      
          ALARM STATUS = ** 0546 SEAS Terminal unavailable 
      
      
          Command Completed.
    Refer to the Commands Manual to interpret the output.
  2. Verify that the IP addresses and ports are correct.

    Correct any discrepancy found.

  3. Check the physical connections.
    See the Installation Manual for more information about these system components. If the connections are firmly seated.
  4. Check for any fuse alarms on the Fuse and Alarm Panel in the frame.
  5. Check that all terminals for the IPSM card are inhibited before inhibiting the card for replacement.
  6. Replace the E5-IPSM card. Refer to the Maintenance Manual for card removal/replacement procedures.