1040 - ITU <-> ANSI translation not supported
This message indicates an invalid translation PC type in attempting to cross the ANSI to ITU domain.
Example
This output indicates an error against the original
destination rather than the redirected destination.
RLGHNCXA21W 02-07-21 16:20:19 EST EAGLE 37.5.0
0018.1040 CARD 1103,A INFO ITU <-> ANSI translation not supported
TRANSLATED PC=003-003-003 TRANSLATED SS=005
CDPA: NI=1 RI=0 GTI=04 SSNI=0 PCI=1
TT=250 NP=04 NAI=010 ADDR=123456789012345678901
PC=003-003-003 SSN=005
CGPA: NI=1 RI=0 GTI=04 SSNI=0 PCI=1
TT=100 NP=07 NAI=012 ADDR=012345678901234567890
PC=001-001-001 SSN=004
LSN=ABCD123 GTTSET=3 (8)
Report Date:02-07-21 Time:16:20:19
This alternate output includes the redirected destination and is
used when a redirected MSU encounters an error.
RLGHNCXA21W 02-07-21 16:20:19 EST EAGLE 37.5.0
0018.1040 CARD 1103,A INFO ITU <-> ANSI translation not supported
TRANSLATED PC=003-003-003 TRANSLATED SS=005
GTT on CdPA used MOSMSGTA=9193802053
CDPA: NI=1 RI=0 GTI=04 SSNI=0 PCI=1
TT=250 NP=04 NAI=010 ADDR=123456789012345678901
PC=003-003-003 SSN=005
CGPA: NI=1 RI=0 GTI=04 SSNI=0 PCI=1
TT=100 NP=07 NAI=012 ADDR=012345678901234567890
PC=001-001-001 SSN=004
LSN=ABCD123 GTTSET=3 (8)
Report Date:02-07-21 Time:16:20:19
Legend
- ADDR
- Address
- CDPA
- Called party address
- CGPA
- Calling party address
- GTI
- Global title indicator
- LSN
- Linkset name. The name must be unique.
- MSG TYPE
- Message type
- NAI
- Nature of address indicator
- NI
- Network indicator value
- NP
- Numbering plan
- OPC
- Origination point code
- PC
- Point code for the SS7 end user (OPC).
- PCI
- Protocol control information
- RI
- Routing indicator
- SIO
- Service information octet
- SSN
- Subsystem number
- SSNI
- Subsystem number indicator
- TRANSLATED PC
- Translated point code
- TRANSLATED SS
- Translated subsystem
- TT
- Translation type
Alarm Level: No alarm condition. The message is informational only.
Recovery
Change the translation PC type to not cross the domain (ANSI <-> ITU), by using the appropriate GTT/GTA commands.
Refer to the EPAP Administration Manual.