1078 - GTT Action Duplicate Failed

This UIM indicates that the EAGLE 5 ISS failed to route or prepare Duplicate MSU for the reason indicated in the UIM.

Example
6618.1078    CARD 1105     INFO    GTT Action DUPLICATE FAILED
             OPC=   1-001-4        DPC=   001-001-002
             CDPA:  NI=0  RI=0  GTI=02  SSNI=1  PCI=0
                    TT=200  NP=--  NAI=---  ADDR=123456
                    PC=--------------    SSN=005
             CGPA:  NI=0  RI=0  GTI=02  SSNI=0  PCI=1
                    TT=010  NP=--  NAI=---  ADDR=234567
                    PC=--------------    SSN=---
             Op-Code=--- Action Set=aset1
             Cause=CLG PC Conv fail
             Report Date:03-04-27  Time:07:42:09
Legend
ADDR
Address
CDPA
Called party address
CGPA
Calling party address
GTI
Global title indicator
LSN
Linkset name. The name must be unique.
MSG TYPE
Message type
NAI
Nature of address indicator
NI
Network indicator value
NP
Numbering plan
OPC
Origination point code
OP-CODE
Operation Code
PARAM
Parameter
PC
Point code for the SS7 end user
PCI
Protocol control information
RI
Routing indicator
SSN
Subsystem number
SSNI
Subsystem number indicator
TT
Translation type

Alarm Level: No alarm condition. The message is informational only.

Recovery:

The cause of the error is included as a reason string in the UIM. Refer to the following table for the recovery steps:

Table 3-7 Error Recovery

Cause Recovery
CDPA GTMOD Failure

CdPA GT Modification failed resulting in Forward action failure.

Correct the GT Modification data in CDGTMODID associated with the GTT Action.

CGPA GTMOD Failure

CgPA GT Modification failed resulting in Forward action failure.

Correct the GT Modification data in CGGTMODID associated with the GTT Action.

Encoding Failure

Encoding of forward MSU failed resulting in Forward action failure.

The True PC for the DPC or EAGLE for destination Network must be configured AND/OR The SCCP data (GTI/SSN) must be corrected such that the message length does not exceed the Maximum MSU length limit.

MAP Lookup Failure

Error in MAP load sharing caused Forward action failure.

Configure the DPC/SSN displayed in UIM within the MAPSETID associated with GTT Action. OR Configure correct MAP SETID (which contains the DPC/SSN displayed in UIM) in GTT Action entry.

Routing Failure

Error in routing the forward MSU caused Forward action failure.

The route for DPC must be provisioned and at least one route to the DPC must be available.

DFLT GT Conv Failure

Default GT conversion failed while creating Forward MSU.

Provision correct Default GT Conversion data for successful network conversion of the MSU.

CLG PC Conv fail

Error in conversion of Calling PC.

Provision correct Conversion data for Calling PC for successful network conversion of the MSU.

Unknown Error

Error in creating Forward MSU for any other reason.

Correct the data associated with Forward GTT Action.