1189 - SCCP did not Route - DPC not in RTE Table

SCCP did not route a message because the destination point code (DPC) is not in the route (RTE) table. The message was discarded.

Example

This output indicates an error against the original destination rather than the redirected destination.
RLGHNCXA21W 02-07-21 16:20:19 EST  EAGLE 37.5.0
0018.1189    CARD 1103,A     INFO    SCCP did not Route - DPC not in RTE Table
             TRANSLATED PC=003-003-003       TRANSLATED SS=005
             CDPA:  NI=1  RI=0  GTI=04  SSNI=0  PCI=1
                    TT=250  NP=04  NAI=010  ADDR=123456789012345678901
                    PC=003-003-003       SSN=005
             CGPA:  NI=1  RI=0  GTI=04  SSNI=0  PCI=1
                    TT=100  NP=07  NAI=012  ADDR=012345678901234567890
                    PC=001-001-001     SSN=004 
             LSN=ABCD123  GTTSET=3 (8)
             Report Date:02-07-21  Time:16:20:19
This alternate output includes the redirected destination and is used when a redirected MSU encounters an error.
RLGHNCXA21W 02-07-21 16:20:19 EST  EAGLE 37.5.0
0018.1189    CARD 1103,A     INFO    SCCP did not Route - DPC not in RTE Table
             TRANSLATED PC=003-003-003       TRANSLATED SS=005
                GTT on CdPA used MOSMSGTA=9193802053
             CDPA:  NI=1  RI=0  GTI=04  SSNI=0  PCI=1
                    TT=250  NP=04  NAI=010  ADDR=123456789012345678901
                    PC=003-003-003       SSN=005
             CGPA:  NI=1  RI=0  GTI=04  SSNI=0  PCI=1
                    TT=100  NP=07  NAI=012  ADDR=012345678901234567890
                    PC=001-001-001     SSN=004 
             LSN=ABCD123  GTTSET=3 (8)
             Report Date:02-07-21  Time:16:20:19
Legend
ADD
Address
CDPA
Called party address
CGPA
Calling party address
GTI
Global title indicator
GTTSET
GTT Set Index
LSN
Linkset name
NAI
Nature of address indicator
NI
Network indicator value
NP
Numbering plan
PC
Point code
PCI
Point code indicator
RI
Routing indicator
SSN
Subsystem number
SSNI
Subsystem number indicator
TT
Translation type
TRANSLATED PC
Translated point code
TRANSLATED SS
Translated subsystem

Note:

If Global Title Translation is found, the GTTSET in which the translation is found appears. If Global Title Translation is not found, the GTTSET does not display.

Alarm Level: No alarm condition. The message is informational only.

Recovery

Check the absence of the DPC in the Routing table by entering the appropriate DPC type (DPCA, DPCN, DPCN24, whichever is applicable).

For example: rtrv-rte:dpc=<ni-nc-ncm>
  • If routing to this destination is required, provision the Routing table.

    See Configuring Destination Tables - Adding a Destination Point Code in the Database Administration Manual - SS7

  • If routing to this destination is not required, remove the destination point code from the Routing table.

    See Configuring Destination Tables - Removing a Destination Point Code in the Database Administration Manual - SS7.