1441 - IP Info mismatch, card reset required

The card stated in the message has an IP mismatch and must be reset. This occurs when the database is updated and a manual reset must be performed for the newly provisioned values to be used.

The IP configuration commands support the MCAP locations when OAMHC is running. Usually these commands require the target card to be inhibited, however for MCAP locations, the command is expected to be run while the card is IS-NR. Since these commands result in a database update, they require the MCAP to be IS-NR. Once the database has been modified, manual reset of the card must be performed for the newly provisioned values to be used. A notice is displayed to the user regarding the reset requirement for an MCAP location. If the MCAP location is not reset, then a UIM is displayed once every hour indicating that the card has an IP Mismatch and must be reset.

Example
RLGHNCXA03W 10-01-11 16:20:19 EST EAGLE 42.0.0
    0020.1441    CARD 1113     INFO      Active OAM IP mismatch, 1113 reset req
                 Report Date:10-01-11  Time:16:20:19


    0020.1441    CARD 1113     INFO      Standby OAM IP mismatch, 1115 reset req
                 Report Date:10-01-11  Time:16:20:19

Alarm Level: No alarm condition. The message is informational only.

Recovery

Reset the card in the appropriate slot as specified in the message text.