1413 - GTT(FLOBR) failure: duplicate set name

This message indicates GTT failed when FLOBR encountered a duplicate GTT set name in the GTT search. This UIM is issued when the Fallback option is OFF in GTA entry. The MSU is discarded.

Example

stpa1071501 09-04-24 10:01:40 EDT  EAGLE5 41.0.0-62.23.1
7386.1413    CARD 2317     INFO    GTT(FLOBR) failure: duplicate set name
             SIO=83   OPC=   14504-aa       DPC=   07347-aa
             SCCP MSG TYPE=09
             CDPA:  NI=0  RI=0  GTI=04  SSNI=1  PCI=1
                    TT=036  NP=01  NAI=004  ADDR=106005000000000000000
                    PC=   07347-aa       SSN=005
             CGPA:  NI=0  RI=0  GTI=04  SSNI=1  PCI=1
                    TT=085  NP=07  NAI=003  ADDR=206005000000000000000
                    PC=   14472-aa       SSN=101
             LSN=ls2314n2  GTTSETIDX=211 215
             Report Date:09-04-24  Time:10:01:40

Legend

ADDR: Address
CDPA: Called party address
CGPA: Calling party address
DPC: Destination point code
GTI: Global title indicator
LSN: Link set name
MSG TYPE: Message type
NAI: Nature of address indicator
NI: Network indicator value
NP: Numbering plan
OPC: Origination point code
PC: In the CDPA section, PC refers to the Called Party Point Code. In the CGPA section, PC refers to the Calling Party Point Code.
PCI: Protocol control information
RI: Routing indicator
SIO: Service information octet
SSN: Subsystem number
SSNI: Subsystem number indicator
TT: Translation type

Alarm Level: No alarm condition. The message is informational only.

Recovery

Verify the provisioning of the GTT information using the rtrv-gta, rtrv-gttsel, and rtrv-gttset commands to determine why the MSU encountered a duplicate GTT set name.