0632 - Alarm Threshold - exceeded

This message indicates the system wide alarm threshold for the throttling GTT Action has exceeded.

Example

12345678901234567890123456789012345678901234567890123456789012345678901234567890   
  *   yyyy.0632 *  SCCP SYSTEM                Alarm Threshold – exceeded

Alarm Level: Minor.

Recovery

1. Use the rept-stat-sfthrot command to verify the number of MSUs currently received by the throttling GTT Action in the 30-second window.
   Example of the output:

   Command Accepted - Processing
       tklc1181001 16-01-08 05:40:53 MST  EAGLE5 46.3.0.0.0-68.8.0
       rept-stat-sfthrot
       Command entered at terminal #3.
   ;
       tklc1181001 16-01-08 05:40:53 MST  EAGLE5 46.3.0.0.0-68.8.0
   
       SCCP Cards Configured= 5      Cards IS-NR= 5
       Average CPU Usage  =  5%
   
       CARD   VERSION     PST             SST           AST        TPS
   
   --------------------------------------------------------------------------
      
       2201   138-008-000 IS-NR           Active        -----      0      
       2213   138-008-000 IS-NR           Active        -----      0 
       2217 P 138-008-000 IS-NR           Active        -----      0 
       2317   138-008-000 IS-NR           Active        -----      0 
       1111   138-008-000 IS-NR           Active        -----      116 
   
       PER TA TPS STATISTICS:
   
   ==========================================================================
                           CURRENT 30 SECS            PREVIOUS 30 SECS
                           ----------------------     ----------------------
       TA         STATUS   SUCCESS     DISCARD        SUCCESS     DISCARD
       
   --------------------------------------------------------------------------
       throt1     ALLOWED  0           0              0           0
       throt2     ALLOWED  0           0              0           0
   
        Command Completed.
   ;
   

2. Use the rtrv-gttact command to display throttle threshold (THRESHOLD) configured for the throttling GTT Action.
3. Use the rtrv-th-alm command to display the system wide alarm threshold percentage (SFTHROTTHRESH) configured for throttling GTT Actions.
4. No action is required if the throttle threshold for the throttling GTT Action and system wide alarm threshold percentage for throttling GTT Actions are configured as necessary.
5. Use the chg-gttact command to update the throttle threshold if the throttle threshold currently configured for the throttling GTT Action is not adequate.
6. Use the chg-th-alm command to update the system wide alarm threshold percentage for throttling GTT Actions, if a higher alarm threshold percentage needs to be set.