Go to primary content
Oracle® Communications EAGLE Unsolicited Alarm and Information Messages Reference
Release 46.7
E97338_01
Go To Table Of Contents
Contents

Previous
Previous
Next
Next

1231 - SCCP Encode Failure

This message indicates that there is an SCCP encode failure.

Example

The UIM is generated by the basic Global Title Translation (GTT) feature. This output indicates an error against the original destination rather than the redirected destination.
tekelecstp 08-12-26 17:02:48 EDT  EAGLE 41.0
5093.1231    CARD 1105     INFO    SCCP Encode Failure
             SIO=03   OPC=   2-011-1        DPC=   1-001-1
             CDPA LENGTH=008   MSG TYPE=09   INV DMA LEN=280
             CDPA: AI=0b PC=   1-001-0       SSN=002 TT=000
                   ADDR=123456
             LSN=lsn2111
             Report Date:08-12-26  Time:17:02
This alternate output includes the redirected destination and is used when a redirected MSU encounters an error.
tekelecstp 08-12-26 17:02:48 EDT  EAGLE 41.0
5133.1231    CARD 1105     INFO    SCCP Encode Failure 2
             SIO=03   OPC=   2-011-1        DPC=   1-001-1
             SCCP MSG TYPE=09   INV DMA LEN=280
             CDPA:  NI=0  RI=0  GTI=02  SSNI=1  PCI=1
                    TT=000  NP=--  NAI=---  ADDR=123456
                    PC=   1-001-0        SSN=002
             CGPA:  NI=0  RI=1  GTI=02  SSNI=1  PCI=1
                    TT=027  NP=--  NAI=---  ADDR=123410
                    PC=   2-011-1        SSN=002
             LSN=lsn2111  GTTSET=(1)
             Report Date:08-12-26  Time:17:51:26
Legend
ADDR
Address
AI
Address Indicator
CDPA LENGTH
Called party address length
CDPA
Called party address
CGPA
Calling party address
DPC
Destination point code
MSG TYPE
Message type (for example, connection request, connection confirm, connection refused)
optional text field
Optional text field providing additional information about the error. Possible text display and definitions may include:
INV DMA LEN=xxx
DMA Length too big or too small: After SCCP encoding of translated MSU DMA Length became too big or too small.
UNSUP Clg GTI=x
GTT attempted on Unsupported CgPA GTI=x
UNSUP Cld GTI=x
GTT attempted on Unsupported CdPA GTI=x
INV Clg GTI=x
GTT attempted on INV CgPA GTI=x
INV Cld GTI=x
GTT attempted on INV CdPA GTI=x
GTCNV:Cld ANSI->ITU fail
Invalid CdPA GTI for ANSI-to-ITU GTCNV table: ANSI MSU is GTT translated to ITU, CdPA GTA record has NGTI as not provisioned, so GTT is using Default GTT (GTCNV table) to convert CdPA, but CdPA GTCNV Selectors (GTI, TT) are not found in GTCNV table
GTCNV:Clg ANSI->ITU fail
Invalid CgPA GTI for ANSI-to-ITU GTCNV table: ANSI MSU is GTT translated to ITU, CgPA RI=GT, SCCP Conversion used Default GTT (GTCNV table) to convert CgPA, but CgPA GTCNV Selectors (GTI, TT) are not found in GTCNV table
GTCNV:Cld ITU->ANSI fail
Invalid CdPA GTI for ITU-to-ANSI GTCNV table: ITU MSU is GTT translated to ANSI, CdPA GTA record has NGTI as not provisioned, so GTT is using Default GTT (GTCNV table) to convert CdPA, but CdPA GTCNV Selectors (GTI, TT, possibly NP and NAI if GTI=4) are not found in GTCNV table
GTCNV:Clg ITU->ANSI fail
Invalid CgPA GTI for ITU-to-ANSI GTCNV table: ITU MSU is GTT translated to ANSI, CgPA RI=GT, SCCP Conversion used Default GTT (GTCNV table) to convert CgPA, but CgPA GTCNV Selectors (GTI, TT, possibly NP and NAI if GTI=4) are not found in GTCNV table
OPC
Origination point code
PC
Point code
SIO
Service information octet
SSN
Subsystem number
TT
Translation type

Alarm Level: No alarm condition. The message is informational only.

Recovery

Contact the distant end node this message refers to and verify action is being taken to correct the SCCP encode failure problem.