1041 - SCCP did not route -no SSN in msg or DB

This message indicates the SCCP message did not route because the SSN was not found in the message or translation data.

Example

This output indicates an error against the original destination rather than the redirected destination.

RLGHNCXA21W 02-07-21 16:20:19 EST  EAGLE 37.5.0
0018.1041    CARD 1103,A     INFO    SCCP did not route -no SSN in msg or DB
           SIO=03   OPC=001-001-001      DPC=002-002-002
              SCCP MSG TYPE=04
              CDPA:  NI=1  RI=0  GTI=04  SSNI=0  PCI=1
                     TT=250  NP=04  NAI=010  ADDR=123456789012345678901
                     PC=003-003-003       SSN=005
              CGPA:  NI=1  RI=0  GTI=04  SSNI=0  PCI=1
                     TT=100  NP=07  NAI=012  ADDR=012345678901234567890
                     PC=001-001-001       SSN=004
              LSN=ABCD123  GTTSET=3 203 46
              Report Date:02-07-21  Time:16:20:19

This alternate output includes the redirected destination and is used when a redirected MSU encounters an error.

RLGHNCXA21W 02-07-21 16:20:19 EST  EAGLE 37.5.0
0018.1041    CARD 1103,A     INFO    SCCP did not route -no SSN in msg or DB
           SIO=03   OPC=001-001-001      DPC=002-002-002
              SCCP MSG TYPE=04
                GTT on CdPA used MOSMSGTA=9193802053
              CDPA:  NI=1  RI=0  GTI=04  SSNI=0  PCI=1
                     TT=250  NP=04  NAI=010  ADDR=123456789012345678901
                     PC=003-003-003       SSN=005
              CGPA:  NI=1  RI=0  GTI=04  SSNI=0  PCI=1
                     TT=100  NP=07  NAI=012  ADDR=012345678901234567890
                     PC=001-001-001       SSN=004
              LSN=ABCD123  GTTSET=3 203 46
              Report Date:02-07-21  Time:16:20:19

Legend

ADDR

Address

CDPA

Called party address

CGPA

Calling party address

GTI

Global title indicator

LSN

Linkset name. The name must be unique.

MSG TYPE

Message type

NAI

Nature of address indicator

NI

Network indicator value

NP

Numbering plan

OPC

Origination point code

PC

Point code for the SS7 end user (OPC).

PCI

Protocol control information

RI

Routing indicator

SIO

Service information octet

SSN

Subsystem number

SSNI

Subsystem number indicator

TT

Translation type

Alarm Level: No alarm condition. The message is informational only.

Recovery

Change the message to include the CDPASSN in the message or provision the SSN in the translation table.

You can change the translation table by using the appropriate GTT (ent-gtt or ent-gta) or the EPAP commands.

Refer to the Commands Manual or the EPAP Administration Manual, respectively for details.