0345 - All SEAS UAL Sessions Unavailable

This message indicates the X.25 User Application Layer (UAL) is not available. If all PVCs for the indicated X.25 link have failed, UAL is no longer available, or all UAL sessions are unavailable.

Example

RLGHNCXA21W 00-02-07 11:02:30 EST  EAGLE 35.0.0
** 0100.0345  **  SEAS X25 Link B1       All SEAS UAL sessions unavailable

Alarm Level: Major

Recovery

1. Enter this command to determine the status of the OAP(s):
   rept-stat-seas
   Example of the output:

   RLGHNCXA03W 00-04-17 14:59:11 EST  EAGLE 35.0.0
                            GPL        PST         SST           AST
   ---------------------------------------------------------------------
   SEAS SYSTEM                         IS-ANR      Restricted    -----
   TDM TRM           6                 IS-NR       Active        -----
   TDM TRM           9                 IS-NR       Active        -----
   OAP              A    220-001-000   IS-NR       Active        -----
   OAP              B    -----------   OOS-MT      Isolated      -----
   X25 Link         A1                 IS-NR       Active        -----
   X25 Link         B1                 OS-MT       Fault         -----
   SEAS SYSTEM  ALARM STATUS = ** 0362  LSMS is at min service limit
   OAP A        ALARM STATUS = No Alarms.
   OAP B        ALARM STATUS = ** 0341 OAP unavailable
   X25          ALARM STATUS = No Alarms.
   X25          ALARM STATUS = ** 0345 All SEAS UAL sessions unavailable
   X25 A1 PVCs IS-NR   = 1,2,3
   X25 A1 PVCs OOS-MT  = ---
   X25 B1 PVCs IS-NR   = ---
   X25 B1 PVCs OOS-MT  = 1,2,3
   Command Completed.

2. Contact the SEAC to verify the X.25 PVCs are correctly configured and activated.
   The SEAC should also deactivate and activate the X.25 link.
3. If the problem persists, reset the OAP by entering the init-oap command.
   The OAP comes back in-service within three minutes and the system clears the alarm.
4. If the problem persists, contact the SEAC to test from their equipment to the local synchronous modem.
5. If the X.25 UAL is still not available, contact My Oracle Support (MOS).