0271 - REPT-LINK-CGST: Discard Level 1 to 2

The link has reached an overflow level 2. The percentage of MSU traffic on the signaling link has exceeded the discard/overflow level defined for level 2. Messages with SIO priority of 0 or 1 are being discarded.

Example

RLGHNCXA21W 00-12-07 12:01:43 EST  EAGLE 35.0.0 
0014.0271    SLK 1205,A nc00027  REPT-LINK-CGST: discard level 1 to 2
             SLC=03   FECLLI=testclli            CLASS=MTP2

Note:

The Class parameter in the example is optional.

Alarm Level: No alarm condition. The message is informational only.

Recovery

1. Since overflow conditions usually peak and subside quickly, a measurements report should be printed to understand what SS7 events took place.
   Use the command rept-meas to obtain a report.

   Note:

   The measurements collection must first be turned on so measurements can be collected. If measurements are not turned on, no report will be available. Refer to the Measurements Manual for traffic measurements information.
2. Ensure that there are enough links in the linkset based on the traffic load.