0441 - Incorrect MBD - CPU

An SM card does not have the required hardware configuration for the application.

Example

eagle11 18-10-30 09:58:56 MST  EAGLE 46.6.0.0.0 
**  5881.0441 ** CARD 1215 SCCP64        Incorrect MBD - CPU
                 HW VERIFICATION CODE:   180

Alarm Level: Major

Recovery

1. If this message contains the optional line HW VERIFICATION CODE: 180:
   • Decode the 180 value and correct the indicated problem.

     See the Hardware Verification Codes in UAMs section of hardware verification codes in the Unsolicited Alarms and Information Messages manual.

   • After correcting the problem, the card is in out-of-service maintenance disabled state (OOS-MT-DSBLD).

     Restore the card back to in-service normal state (IS-NR) with the alw-card command.

   If this message does not contain the optional line HW VERIFICATION CODE: 180, continue with the next step.
2. Verify the hardware.

   Verify the SM card(s) supports the provisioned database capacity.

   Refer to the Maintenance Manual for card removal/replacement procedures.