1136 - Invalid Diameter Msg length

This message indicates one of the following conditions:

1. The total Diameter message length specified in the diameter header does not match the actual diameter message length.
2. The diameter message length is greater than the maximum length of 448 bytes supported by current EIR S13/S13's implementation.

Example

12345678901234567890123456789012345678901234567890123456789012345678901234567890
    xxxx.1136    CARD 1101,B INFO     Invalid Diameter Msg length 
                 DCNAME= dcon1           
                 Command Code=  (R)
                 Origin Host=---
                 Error Cause=---

Alarm Level: No alarm condition. The message is informational only.