SYSTEM CONFIGURATION - Third Party
System configuration is an administrative maintenance to define the details required to set up the system.
Post successful installation of OBAPIs, the system administrator will have an option to define if the bank has multi entity setup enabled and whether data sharing is allowed between entities
Currently, the system supports only data sharing enabled and does not support data sharing as disabled
If multi entity is enabled, then the system administrator can create new entities along with definition of details. Once the entities are created, administrator can define system configuration details for each of the entities.
Following are the components that can be defined as part of system configuration.
- Basic Details
- Bank Details
- Branch Details
- Currency Payments
- SMTP
- Third Party Configurations
- Dynamic Module Details
As part of module details, the set of modules listed will be based on the host system selected.
Features supported in application
System Configuration allows the System AdministratorAdministrator is a set of individuals that administer the applicant/Affiliate entity. For example, Accountants, Authorized Signatories for organizations, Power of Attorney for individuals. to:
- Define System Configuration
- View System Configuration
- Edit System Configuration
How to reach here:
Dashboard > Common Services >System Configuration
System Configuration – Entity Definition
To set-up the system configuration:
- The Administrator logins in to the application using valid login credentials.
The System Configuration screen to configure multi entity set up appears.
System Configuration - Entity Setup
Field Name |
Description |
---|---|
Does your set up has Multi Entity? |
Option to decide whether the setup has multi entity or not. |
Entity Id |
Current entity id defined as part of the setup |
Entity Name |
Current entity name defined as part of the setup. |
- In the Does your set up has Multi Entity? field, select Yes to configure if the bank has multi entity implementation applicable.
OR
Select if the bank does not have multi entity setup applicable. - Click
System Configuration - Multi Entity Setup
Field Name |
Description |
---|---|
Does your set up has Multi Entity? |
Option to select whether the setup has multi entity enabled or not. |
Does your setup has data sharing |
Option to select whether the setup has data sharing enabled between entities. |
Entity Id |
Unique Identification mapped to the default Entity. |
Entity Name |
Name of the default entity. |
Time Zone |
Time zone of the default entity. |
- In the Does your setup has data sharing field, select an appropriate option for data sharing between entities. Currently the system only supports an option of data sharing between entities as ‘Yes'.
- Click to edit the details of the default entity if required.
OR
Select an appropriate Time zone from the list for the default entity. - Click Add Entity create a new entity. An additional row/ section to enter the new entity details i.e. Entity ID, Entity Name and Time zone appears.
Field Name |
Description |
---|---|
Does your set up has Multi Entity? |
Option to select whether the setup has multi entity enabled or not. |
Does your setup has data sharing |
Option to select whether the setup has data sharing enabled between entities. |
Entity Id |
Enter the unique ID of the new entity being created |
Entity Name |
Enter the name of the new entity being created. |
Time Zone |
Select the Time zone from the list for the new entity being created. |
- In the Entity Id field, enter the entity id for the new entity being created.
- In the Entity Name field, enter the entity name for the new entity being created.
- From the Time Zone list, select the appropriate time zone for the new entity being created.
- Click to save the entity details.
- Click to edit the already added entity details.
OR
Click to delete the entity details. - Click
OR
Click Add Entity to add more entities.
. The System Configuration Setup details screen appear.
System Configuration - Basic Details
Field Name |
Description |
---|---|
Entity Name |
Name of the entities added to the setup. |
Select Host |
You need to select the host system for the channel banking platform. |
Web Server Host |
Enter the address of the web-server host. |
Web Server Port |
Enter the web server port number. |
Application Server Host |
Enter the address of the application server host. |
Application Server Port |
Enter the application server port number |
- Select the Host System as Third Party and start the third party configuration.
- In the Web Server Host field, enter the host name of the web server.
- In the Web Server Port field, enter the port number of the web server.
- In the Application Server Hostfield, enter the address of the application server.
- In the Application Server Port field, enter the port number of the application server.
- Click
OR
Click to cancel the setup process.
. The System Configuration – Bank Details screen appears.
System Configuration – Bank Details
Field Name |
Description |
---|---|
Bank Code |
Enter unique code to identify the bank. |
Bank Group Code |
Enter the bank group code. |
Bank Name |
Enter the name of the bank. |
Bank Short Name |
Enter the short name of the bank. |
Address - Line 1 - 3 |
Enter the address of the bank. |
Country |
Enter the country in which the bank is located/ headquartered. |
ZIP Code |
Enter the ZIP code of the bank. |
Allowed Account Types |
Select the allowed account types applicable for the bank. The options can be:
|
Bank Currency |
Specify the default currency applicable for the bank. |
- In the Bank Code field, enter the code of the bank.
- In the Bank Group Code field, enter the group code of the bank.
- In the Bank Name field, enter the name of the bank.
- In the Bank Short Name field, enter the short name of the bank.
- In the Address Line 1 - 3 field, enter the address details of the bank.
- From the Country list, select the country in which the bank is located.
- In the ZIP Code field, enter the city/ zip code where bank is located.
- Select the Allowed Account Types check box. You can select Conventional / Islamic / Both.
- Click
OR
Click to go to the previous screen.
OR
Click to cancel the setup process.
. The System Configuration – Branch Details screen appears.
System Configuration – Branch Details
Field Name |
Description |
---|---|
Bank Code |
Enter the unique code to identify the bank. You should specify the same bank code as specified in the previous section. |
Branch Code |
Enter the branch code. |
Home Branch |
Specify the home branch for the bank. |
Local Currency |
Select the local currency applicable for the branch. |
Calculation Currency |
Select the calculation currency applicable. |
Region |
Select the region of bank payments. The options are:
|
- In the Bank Code field, enter the code of the bank.
- In the Branch Code field, enter the code of the bank branch.
- In the Home Branch field, enter the code of the home branch of the bank.
- From the Local Currency list, select the local currency of the bank branch.
- From the Calculation Currency list, select the calculation currency.
- From the Region list, select the appropriate region for payments.
- Click
OR
Click to go to the previous screen.
OR
Click to cancel the setup process.
. The System Configuration – Currency Payments screen appears.
System Configuration – CurrencyA generally accepted form of money, including coins and paper notes, which is issued by a government and circulated with in an economy. Payments
Field Name |
Description |
---|---|
International Fund Transfer |
Specify the currencies that are applicable for international fund transfer transactions. |
International Draft |
Specify the currencies that are applicable for international draft transactions. |
- For the International Fund Transfer list, select the required currency.
- For the International Draft list, select the required currency.
- Click
OR
Click to go to the previous screen.
OR
Click to cancel the setup process.
. The System Configuration – SMTP screen appears.
Field Name |
Description |
---|---|
Server Name |
Enter the address of the mail server. |
Port |
Enter the port number |
Sender Email Address |
Enter the email address of the sender. |
Recipient Email Address |
Enter the email address of the recipient. |
Authentication Required |
Select the check box, if authentication is required. |
Username |
Enter the user name. |
Password |
Enter the password. |
- In the Server Name field, enter the address of the mail server.
- In the Port field, enter the port number.
- In the Sender Email Address, enter the email address of the sender.
- In the Recipient Email Address, enter the email address of the recipient.
- In the Username, enter user name.
- In the Password field, enter the password.
- Click
OR
Click to go to the previous screen.
OR
Click to cancel the setup process.
. The System Configuration –Third Party Configurations - Host Details screen appears.
System Configuration –Third PartyA party is any individual or business entity having a banking relationship with the bank. Configurations – Host Details
Through this, user can maintain external host details configuration and queue configuration that are essential for enabling messaging for communication with external host systems.
Field Name |
Description |
---|---|
Host Name |
System defaults the host name as THP. |
Host Version |
System defaults the version number of the host to 1.0. |
- System defaults the host name as THP and version number as 1.0
- Click
OR
Click to go to the previous screen.
OR
Click to cancel the setup process.
. The System Configuration – Third Party Configurations - Queue Configurations screen appears.
System Configuration – Third Party Configurations - Queue Configurations
As part of this, the user defines the configuration of the sender/ receiver message queues and connection factories used for messaging service.
Field Name |
Description |
---|---|
Receiver Queue Connection Factory |
Enter the JNDI name of the receiver connection factory which is created inside Receiver JMS module. (For Example-ExtSystemReceiverQCF2). |
Receiver Queue |
Enter the JNDI name of the receiver queue (destination used for receiving the message from external host) created in the receiver JMS module. (For Example-ExtSystemReceiverQueue2). |
Sender Queue Connection Factory |
Enter the JNDI name of the sender connection factory, which is created inside Sender JMS module. (For Example-ExtSystemSenderQCF2). |
Sender Queue |
Enter the JNDI name of the sender queue created in the Sender JMS module. (For Example-ExtSystemSenderQueue2). |
- In the Receiver Queue Connection Factory field, enter the appropriate value.
- In the Receiver Queue field, enter the appropriate value.
- In the Sender Queue Connection Factory field, enter the appropriate value.
- In the Sender Queue field, enter the appropriate value.
- Click
OR
Click to go to the previous screen.
OR
Click to cancel the setup process.
. The System Configuration – Dynamic Module – BRAND screen appears.
System Configuration – Dynamic Module - BRAND
Field Name |
Description |
---|---|
Content Publisher URL |
Specify the URL of the content publisher. |
Content Server URL |
Specify the URL of the content server. |
- In the Content Publisher URL field, enter the URL of content publisher.
- In the Content Server URL field, enter the URL of content server.
- Click
OR
Click to go to the previous screen.
OR
Click to cancel the setup process.
. The System Configuration – Dynamic Module – Forex Deal screen appears.
System Configuration – Dynamic Module – ForexForeign Exchange Currency Deal
Field Name |
Description |
---|---|
Forex Deal Spot(Code) |
Enter the product code for the spot forex deal. |
Forex Deal Forward (Code) |
Enter the product code for forex deal forward (the duration upto which deal will be valid). |
Forex Deal Forward (Desc) |
Enter the product description for forex deal forward. |
Forex Deal Spot (Desc) |
Enter the product description for spot forex deal. |
- In the Forex Deal Spot (Code) field, enter the code.
- In the Forex Deal Forward (Code) field, enter the code.
- In the Forex Deal Forward (Desc) field, enter the description.
- In the Forex Deal Spot (Desc) field, enter the description.
- Click
OR
Click to go to the previous screen.
OR
Click to cancel the setup process.
. The System Configuration – Dynamic Module – Other Module screen appears.
System Configuration – Dynamic Module – Other module
Field Name |
Description |
---|---|
Limits Effective from Same Day (Y/N) |
Specify if limits are effective from the same day or next day. |
Bank Code |
Enter the unique identification code for the bank. |
Host Name |
Enter the host system for the channel banking platform. |
Branch Code |
Enter the bank branch code. |
Currency Support In Approval Rules |
Specify if currency as a parameter is supported in approval rules. |
Region |
Select the region of bank payments. The options are:
|
Flag to enable SSL |
Specify if the flag for SSL needs to be enabled. |
Application Server Host |
Enter the address of the application server host. |
Application Server Port |
Enter the application server port number. |
Application Server Host |
Enter the address of the application server host. |
Host IP |
Specify the Host IP of the selected host system. |
Port |
Specify the port for the host system. |
Channel |
Specify the channel as ‘IBInternet Banking’ to access the application. |
Host Date |
Enter the posting date of the host system. |
Host IP |
Specify the Host IP of the selected host system. |
Port |
Specify the port for the host system. |
Identification Types |
Select the identification type whether it is from local or remote.. |
Date Default |
Specify the default date for the system. |
Application Server Port |
Enter the application server port number |
Web Server Host |
Enter the address of the web server host. |
Supported Auth Type |
Enter the supported authorization type. |
Supported Auth Type |
Enter the supported authorization type. |
Supported Soft Token |
Enter the supported soft token type. |
TD Pool Code |
Specify the pool code for TDTerm Deposit is a deposit accepted by bank, for a fixed term, from customers. A term deposit is a liability of a bank with fixed maturity period. account type. |
Host WSDL Version |
Enter the host WSDL version number. |
Administrator Supported Auth Type |
Enter the authorization type supported by the application for administrator users. |
Corporate User Supported Auth Type |
Enter the authorization type supported by the application for corporate users. |
Retail User Supported Auth Type |
Enter the authorization type supported by the application for retail users. |
Anonymous Security Policy |
Specify the security policy that is applicable for anonymous users i.e. users not logged in. |
Anonymous Security Key Name |
Specify the security key name for anonymous users. |
IDCS Host IP |
Specify the Host IP of the IDCS host system. |
IDCS Host Port |
Specify the port for the IDCS host system. |
IDCS Connection Scheme |
Specify the IDCS connection scheme. |
IDCS OBAPIs Client Id |
Specify the IDCS OBAPIs client unique identification number. |
IDCS OBAPIs Client Secret |
Specify the IDCS OBAPIs client secret number. |
IPM Host IP address |
Specify the IP address for the IPMImaging And Process Management host system. |
IPM Host port |
Enter the IPM host port. |
IPM Host username |
Specify the IPM host username. |
IPM Host password |
Specify the host password for the IPM host system. |
IPM Host application name |
Enter the IPM host application name. |
Allows Touch Point Level Limit Definition (Y/N) |
Specify whether the touch point level limit definition is allowed or not. |
OAM OAuth IP |
Enter the port IP for OAM authorization. |
OAM OAuth Port |
Enter the port number for OAM authorization. |
Deposit Installment Amount Limit |
Enter the maximum limit to deposit the installment amount. |
Deposit Cumulative Amount Limit |
Enter the cumulative limit to deposit the amount. |
Feedback for a Transaction |
Select when the feedback for a transaction is required. |
Allow Multiple Goods (Y/N) |
Specify whether multiple goods are allowed or not. |
Fetch Guarantee Type from Host (Y/ N) |
Specify whether the fetching of guarantee type from host is required or no. |
FATCA Compliance check required (Y/ N) |
Specify whether the FATCA compliance check is required or not. |
Open Term Deposit Threshold Amount |
Enter the threshold amount for term deposit. |
Note: The fields appearing in the System Configuration – Dynamic Module – Other Module tab depends on the settings done at the back end and is dynamic in nature.
- Enter the relevant details in the Dynamic Module - Other Module tab.
- Click
OR
Click to go to the previous screen.
OR
Click to cancel the setup process.
. The System Configuration – Dynamic Module – Origination screen appears.
System Configuration – Dynamic Module - Origination
Field Name |
Description |
---|---|
Co- Applicant Registration URL |
Specify the URL for registration of the co-applicant. |
Origination Date of Birth Limit Check |
Select the option for validating the date of birth limit i.e. Local / Remote. |
Savings Header Function |
Specify the host system code for savings account initiation stage. |
Savings Header Module |
Specify the identifier of the module for savings account. |
Savings First Body Header Function |
Specify the host system stage code for savings account. |
Savings First Body Header Additional Name |
Specify the name for additional parameter for savings account. |
Savings First Body Header Additional Value |
Specify the value for additional parameter for savings account. |
Savings Second Body Header Function |
Specify the host system code for savings account initiation stage. |
Savings Second Body Header Additional Name |
Specify the name for additional parameter for savings account. |
Savings Second Body Header Additional Values |
Specify the value for additional parameter for savings account. |
Savings Application Category |
Specify the savings account application category. |
Savings Account Class |
Specify the host system account class for savings account. |
Auto Loan Header Function |
Specify the host system stage code for auto loan. |
Auto Loan Header Module |
Specify the identifier of module for auto loan account. |
Auto Loan First Body Header Action |
Specify the host system code to start new auto loan application. |
Auto Loan First Body Header Function |
Specify the host system stage code for auto loans. |
Auto Loan First Body Header Additional Name |
Specify the name for additional parameter for auto loan. |
Auto Loan First Body Header Additional Value |
Specify the value for additional parameter for auto loan. |
Auto Loan Application Category |
Specify the auto loan application category. |
Auto Loan Account Class |
Specify the host system account class for auto loans. |
Auto Loan Product Code |
Specify the host system product code for auto loans. |
Savings Process Code |
Specify the host system process code for savings account. |
Auto Loan Process Code |
Specify the host system process code for auto loans. |
Current Header Function |
Specify the host system code for current account initiation stage. |
Current Header Module |
Specify the module identifier for current account. |
Current First Body Header Function |
Specify the host system code for current account initiation stage. |
Current First Body Header Additional Name |
Specify the name of the additional parameter for current account. |
Current First Body Header Additional Value |
Specify the value of the additional parameter for current account. |
Current Second Body Header Action |
Specify the identifier to indicate modification of current account application. |
Current Second Body Header Function |
Specify the host system code for current account initiation stage. |
Current Second Body Header Additional Name |
Specify the name of the additional parameter for current account. |
Current Second Body Header Additional Value |
Specify the value of the additional parameter for current account. |
Current Application Category |
Specify the host system application category for current account. |
Current Account Class |
Specify the host system account class for current account. |
Current Process Code |
Specify the host system process code for current account. |
Personal Loan Header Function |
Specify the host system code for personal loan initiation stage. |
Personal Loan Header Module |
Specify the module identifier for personal loan account. |
Personal Loan First body Header Function |
Specify the host system stage code for auto loans. |
Personal Loan First Body Header Additional Name |
Specify the name of the additional parameter for personal loan account. |
Personal Loan First Body Header Additional Value |
Specify the value for additional parameter for personal loan account. |
Personal Loan Application Category |
Specify the host system application category for personal loan. |
Personal Loan Account Class |
Specify the host system account class for personal loan. |
Personal Loan Product Code |
Specify the host system product code for personal loan. |
Personal Loan Process Code |
Specify the host system process code for personal loan. |
Savings Location |
Specify the default location for savings account. |
Personal Loan Location |
Specify the default location for personal loan account. |
Auto Loan Location |
Specify the default location for auto loan account. |
Current Location |
Specify the default location for current loan account. |
Savings App State |
Specify the host system code for savings account application state. |
Savings App Status |
Specify the host system code for savings account application status. |
CASA Bundle Id |
Specify the bundle Id for current and savings account. |
Preferred Mode of Offer Document Delivery |
Specify the preferred mode of delivery for the documents. |
Default Employer |
Specify the value of default employer. |
Note: The fields appearing in the System Configuration – Dynamic Module – Origination tab depends on the configuration done at the back end and is dynamic in nature.
- Enter the relevant details in the Dynamic Module - Originations tab.
- Click
OR
Click to go to the previous screen.
OR
Click to cancel the setup process.
. The System Configuration – Dynamic Module – Service Request URL screen appears.
System Configuration – Dynamic Module - Service Request URL
Field Name |
Description |
---|---|
Service Request Turnaround Time |
Enter the turnaround time for service request. |
Request Expiration duration (in days) |
Enter the number of days after which service requests gets expired after submission. |
Service Request Persistent Type |
Enter the persistent type for service request. |
- In the Service Request Turnaround Time field, enter the values for turnaround time.
- In the Request Expiration duration (in days) field, enter the values for expiration duration.
- In the Service Request Persistent Type field, enter the persistent type for service request.
- Click
OR
Click to go to the previous screen.
OR
Click to cancel the setup process.
. The System Configuration – Dynamic Module – Common screen appears.
System Configuration – Dynamic Module - Common
Field Name |
Description |
---|---|
Batch Request URL |
Specify the URL for batch request processing. |
- Enter the Batch Request URL.
- Click
OR
Click to go to the previous screen.
OR
Click to cancel the transaction.
to save the entered details. - The success message along with the reference number and status appears.
Click to complete the process.
System Configuration – View and Edit
Using this option the system administrator can view and edit the system configuration details that have already been created.
- The System Administrator logs in to the application using valid login credentials.The System Configuration screen with multiple entities if defined appears in the editable form.
- Select the desired entity for which you wish to edit the details.
- Click against the respective entity to edit the details i.e. Entity Name and Time Zone.
- Click to save the entity details.
- Click . The System Configuration - Basic Details screen with mapped entities appear.
- Select the entity for which you wish to edit the system configuration details.
- Select the Host Systemas Third Party to edit the Third Party configuration.
- Click
System Configuration - Basic Details - Edit
Field Name |
Description |
---|---|
Web Server Host |
Displays the web server host details and available for edit. |
Web Server Port |
Displays the port of the web server and available for edit. |
Application Server Host |
Displays the application server host details and available for edit. |
Application Server Port |
Displays the port of the application server and available for edit. |
- In the Web Server Host field, edit the address of the web server if required.
- In the Web Server Port field, edit the port number of the web server if required.
- In the Application Server Host field, edit the host name of the application server if required.
- In the Application Server Port field, edit the port number of the application server port if required.
- Click
OR
Click to cancel the transaction.
to save the changes. - The System Configuration - Basic Details - Review screen appears. Verify the details, and click
OR
Click to cancel the transaction.
OR
Click the Bank Details, Branch Details, Currency Payments, SMTP, Third Party Configurations or Dynamic Modules tabs to view and edit the respective details.
. - The screen with success message along with the reference number and status appears. Click OK to complete the transaction.
System Configuration - Bank Details View and Edit
Using this option System Administrator maintains the bank details. These details once defined can be viewed and edited using this transaction.
To view and edit the bank details:
- Click on System Configuration option on the dashboard and navigate to the bank details tab. The default option is ‘View’.
- Click to edit the Bank Details. The System Configuration - Bank Details screen appears in editable form.
Field Name |
Description |
---|---|
Bank Code |
Displays the bank code as defined and available for edit. |
Bank Group Code |
Displays the bank group code as defined and available for edit. |
Bank Name |
Displays the name of the bank as defined and available for edit. |
Bank Short Name |
Displays the short name of the bank as defined and available for edit. |
Address - Line 1 - 3 |
Displays the address of the bank as defined and available for edit. |
Country |
Displays the country of the bank and available for edit. |
ZIP Code |
Displays the ZIP code of the bank. |
Allowed Account Types |
Displays the allowed account types as defined and available for edit. The options are:
|
Bank Currency |
Displays the applicable bank currency and available for edit. |
- In the Bank Code field, edit the code of the bank.
- In the Bank Group Code field, edit the group code of the bank.
- In the Bank Name field, edit the name of the bank.
- In the Bank Short Name field, edit the short name of the bank.
- In the Address Line 1 - 3 field, edit the address of the bank if required.
- From the Country list, edit the country of the bank if required.
- From the Bank Currency list, edit the currency of the bank if required.
- In the City and ZIP Code field, edit the city/ zip code of the bank if required.
- Select/ de-select the Allowed Account Types check box, to edit the selection, if required.
- Click
OR
Click to cancel the transaction.
to save the changes. - The System Configuration - Bank Details - Review screen appears. Verify the details, and click
OR
Click to cancel the transaction.
OR
. - Click the Basic Details, Branch Details, Currency Payments, SMTP, Third Party Configurations or Dynamic Modules tabs to view and edit the respective details.
- The screen with success message along with the reference number and status appears. Click to complete the transaction.
System Configuration - Branch Details - View and Edit
Using this option System Administrator maintains the branch details. These details once defined can be viewed and edited using this transaction.
To view and edit the branch details:
- Click on System Configuration option on the dashboard and navigate to the branch details tab. The default option is ‘View’.
- Click to edit the Branch Details. The System Configuration - Branch Details screen appears in editable form.
Field Name |
Description |
---|---|
Bank Code |
Displays the unique code of the bank as defined. |
Branch Code |
Displays the bank branch code as defined and available for edit. |
Home Branch |
Displays the home branch code as defined and available for edit. |
Local Currency |
Displays the local currency as defined and available for edit. |
Calculation Currency |
Displays the calculation currency as defined and available for edit. |
Region |
Displays the region of bank payments as defined and available for edit. The options are:
|
- In the Bank Code field, edit the code of the bank.
- In the Branch Code field, edit the branch code of the bank.
- In the Home Branch field, edit the name of the home branch of the bank.
- From the Local Currency list, select the local currency of the bank branch.
- From the Calculation Currency list, select the calculation currency of the bank branch.
- From the Region list, select the appropriate region.
- Click
OR
Click to cancel the transaction.
to save the changes. - The System Configuration - Branch Details - Review screen appears. Verify the details, and click
OR
Click to cancel the transaction.
OR
Click the Basic Details, Bank Details, Currency Payments, SMTP, Third Party Configurations or Dynamic Modules tabs to view and edit the respective details.
. - The screen with success message along with the reference number and status appears. Click OK to complete the transaction.
System Configuration - Currency Payments - View and Edit
Using this option, the system administrator maintains the currency for international payment transactions. These details once defined can be viewed and edited using this transaction.
To view and edit the System Configuration - Currency Payments details
- Click on System Configuration option on the dashboard and navigate to the currency payments tab. The default option is ‘View’.
- Click to edit the Currency Payments. The System Configuration - Currency Payments screen appears in editable form.
Field Name |
Description |
---|---|
International Fund Transfer |
Displays the currencies that are applicable for international fund transfer transactions and available for edit. |
International Draft |
Displays the currencies that are applicable for international draft transactions and available for edit. |
- For the International Fund Transfer transaction, select the appropriate currency.
- For the International Draft transaction, select the appropriate currency.
- Click
OR
Click to cancel the transaction.
to save the changes. - The System Configuration - Currency Payments - Review screen appears. Verify the details, and click
OR
Click to cancel the transaction.
OR
Click the Basic Details, Bank Details, Branch Details, SMTP, Third Party Configurations or Dynamic Modules tabs to view and edit the respective details.
. - The screen with success message along with the reference number and status appears.Click OK to complete the transaction.
System Configuration – SMTP - View and Edit
Using this option, the system administrator maintains the SMTP configurations. These details once defined can be viewed and edited using this transaction.
To view and edit the SMTP details:
- Click on System Configuration option on the dashboard and navigate to the SMTP tab. The default option is ‘View’.
- Click to edit the SMTP. The System Configuration – SMTP screen appears in editable form.
Field Name |
Description |
---|---|
Server Name |
Displays the name of the server and available for edit. |
Port |
Displays the port number and available for edit. |
Sender Email Address |
Displays the email address of the sender and available for edit. |
Recipient Email Address |
Displays the email address of the recipient and available for edit. |
Authentication Required |
Select the check box, if authentication is required. |
Username |
Displays the user name and available for edit. |
Password |
Displays the password and available for edit. |
- In the Server Name field, edit the name of the mail server if required.
- In the Port field, edit the port number if required.
- In the Sender Email Address, edit the email address of the sender if required.
- In the Recipient Email Address, edit the email address of the recipient if required.
- In the Username, edit the user name if required.
- In the Password field, edit the password if required.
- Click the Send Test Email link to send a test mail.
- Click
OR
Click to cancel the transaction.
to save the changes. - The System Configuration – SMTP - Review screen appears. Verify the details, and click
OR
Click to cancel the transaction.
OR
Click the Basic Details, Bank Details, Branch Details, Currency Payments, Third Party Configurations or Dynamic Modules tabs to view and edit the respective details.
. - The screen with success message along with the reference number and status appears. Click OK to complete the transaction.
System Configuration – Third Party Configurations - Host Details - View and Edit
Using this option System Administrator can view the maintained host details and also edit the required details.
To view and edit the host details:
- Click on System Configuration option on the dashboard and navigate to the host details tab. The default option is ‘View’
- Click
OR
Click to cancel the transaction.
to edit the Host Details. The System Configuration -Third Party Configurations - Host Details screen appears in editable form.
Field Name |
Description |
---|---|
Host Name |
Displays the host name. This field is not editable. |
Host Version |
Displays the host version and available for edit. |
- In the Host Name list, enter the host name.
- From the Host Version list, select the version of the host, if required.
- Click
OR
Click to cancel the transaction.
to save the changes. - The System Configuration - Third Party Configurations - Host Details - Review screen appears. Verify the details, and click
OR
Click to cancel the transaction.
OR
Click the Basic Details, Bank Details, Branch Details, Currency Payments, SMTP or Dynamic Modules tabs to view and edit the respective details.
. - The screen with success message along with the reference number and status appears. Click to complete the transaction.
System Configuration - Third Party Configurations – View and Edit
Using this option, system administrator can edit the third party configurations - Queue Configurations details.
To view and edit the third party configurations - Queue Configurations details:
- Click on System Configuration option on the dashboard and navigate to the Third Party Configurations - Queue Configurations tab. The default option is ‘View’.
- Click to edit the Third Party Configurations - Queue Configurations . The System Configuration –Third Party Configurations - Queue Configurations screen appears in editable form.
Field Name |
Description |
---|---|
Receiver Queue Connection Factory |
Displays the JNDI name of the receiver connection factory which is created inside Receiver JMS moduleand available for edit. |
Receiver Queue |
Displays the JNDI name of the receiver queue (destination used for receiving the message from external host) created in the receiver JMS module and available for edit. |
Sender Queue Connection Factory |
Displays the JNDI name of the sender connection factory, which is created inside Sender JMS module and available for edit. |
Sender Queue |
Displays the JNDI name of the sender queue created in the Sender JMS module and available for edit. |
- In the Receiver Queue Connection Factory field, edit the value if required.
- In the Receiver Queue field, edit the value if required.
- In the Sender Queue Connection Factory field, edit the value if required.
- In the Sender Queue field, edit the value if required.
- Click
OR
Click to cancel the transaction.
to save the changes. - The System Configuration - Third Party Configurations - Queue Configurations - Review screen appears. Verify the details, and click
OR
Click to cancel the transaction.
OR
Click the Basic Details, Bank Details, Branch Details, Currency Payments, SMTP or Dynamic Modules tabs to view and edit the respective details.
. - The screen with success message along with the reference number and status appears. Click OK to complete the transaction.
System Configuration – Dynamic Module
The dynamic modules corresponding to the selected host required to run the application are defined and configured by system administrator.
The modules are included depending on the type of host selected
System Configuration – Dynamic Module – BRAND – View and Edit
Using this option, the system administrator maintains the BRAND configurations. These details once defined can be viewed and edited if required.
To view and edit the BRAND module details:
- Click on System Configuration option on the dashboard and navigate to the dynamic module – BRAND tab. The default option is ‘View’.
- Click to edit the Dynamic Module – BRAND. The System Configuration - Dynamic Module – BRAND screen appears in editable form.
Field Name |
Description |
---|---|
Content Publisher URL |
Displays the URL as defined for publishing the content and available for edit. |
Content Server URL |
Displays the URL as defined for server the content and available for edit. |
- In the Content Publisher URL field, edit the web address if required.
- In the Content Server URL field, edit the web address if required.
- Click
OR
Click to cancel the transaction.
to save the changes. - The System Configuration - Dynamic Module – BRAND - Review screen appears. Verify the details, and click
OR
Click to cancel the transaction.
OR
Click the Basic Details, Bank Details, Branch Details, Currency Payments, SMTP or Third Party Configuration tabs to view and edit the respective details.
. - The screen with success message along with the reference number and status appears. Click OK to complete the transaction.
System Configuration – Dynamic Module – Forex Deal- View and Edit
Using this option, system administrator can view and edit the Forex Deal module details.
To view and edit the Dynamic Module – Forex Deal details:
- Click on System Configuration option on the dashboard and navigate to the dynamic module – Forex Deal tab. The default option is ‘View’.
- Click to edit the Dynamic Module – Forex Deal. The System Configuration - Dynamic Module – Forex Deal screen appears in editable form.
Field Name |
Description |
---|---|
Forex Deal Spot(Code) |
Displays the product code for the spot forex deal and available for edit. |
Forex Deal Spot (Desc) |
Displays the product description for spot forex deal and available for edit. |
Forex Deal Forward (Desc) |
Displays the product description for forex deal forward and available for edit. |
Forex Deal Forward (Code) |
Displays the product code for forex deal forward (the duration upto which deal will be valid) and available for edit. |
- In the Forex Deal Spot (Code) field, edit the code if required.
- In the Forex Deal Spot (Desc) field, edit the description if required.
- In the Forex Deal Forward (Desc) field, edit the description if required.
- In the Forex Deal Forward (Code) field, edit the code if required.
- Click
OR
Click to cancel the transaction.
to save the changes. - The System Configuration - Dynamic Module – Forex Deal - Review screen appears. Verify the details, and click
OR
Click to cancel the transaction.
OR
Click the Basic Details, Host Details, Bank Details, Branch Details, Currency Details, SMTP or Dynamic Module tabs to view and edit the respective details if required.
. - The screen with success message along with the reference number and status appears.
Click OK to complete the transaction.
System Configuration – Dynamic Module – Other Module- View and Edit
Using this option, system administrator can view and edit the Other module details.
To view and edit the Dynamic Module – Other Module details:
- Click on System Configuration option on the dashboard and navigate to the dynamic module – Other Module tab. The default option is ‘View’.
- Click to edit the Dynamic Module – Other Module. The System Configuration - Dynamic Module – Other Module screen appears in editable form.
Field Name |
Description |
---|---|
Date Default |
Displays the default date for the system and available for edit. |
Open Term Deposit Threshold Amount |
Displays the threshold amount for term deposit and available for edit. |
Allow Multiple Goods (Y/N) |
Displays whether multiple goods are allowed or not and available for edit. |
Host Date |
Displays the Host date of the selected host system and available for edit. |
Region |
Displays the region of bank payments and available for edit. |
Application Server Host |
Displays the address of the application server host and available for edit. |
IDCS Host Port |
Displays the port number of the IDCS host system and available for edit. |
Deposit Cumulative Amount Limit |
Displays the maximum limit to deposit the cumulative amount and available for edit. |
Limits Effective from Same Day (Y/N) |
Display whether the limits are effective from the same day or next day and available for edit. |
Port |
Displays the port for the host system and available for edit. |
Channel |
Displays the channel as ‘IB’ to access the application and available for edit. |
Corporate User Supported Auth Type |
Displays the authorization type supported by the application for corporate users and available for edit. |
Branch Code |
Displays the bank branch code. |
Host Name |
Displays the host system for the channel banking platform and available for edit. |
IDCS OBAPIs Client Id |
Specify the IDCS OBAPIs client unique identification number. |
Host IP |
Displays the Host IP of the selected host system and available for edit. |
Currency Support In Approval Rules |
Displays if currency as a parameter is supported in approval rules and available for edit. |
Deposit Installment Amount Limit |
Displays the maximum limit to deposit the installment amount and available for edit. |
Host IP |
Displays the Host IP of the selected host system and available for edit. |
Flag to enable SSL |
Displays the flag to enable SSL and available for edit. |
Allows Touch Point Level Limit Definition (Y/N) |
Displays whether the touch point level limit definition is allowed or not and available for edit. |
Anonymous Security Key Name |
Displays the security key name and available for edit. |
Fetch Guarantee Type from Host (Y/ N) |
Displays whether the fetching of guarantee type from host is required or not and available for edit. |
IDCS Host IP |
Displays the Host IP of the IDCS host system and available for edit. |
OAM OAuth IP |
Displays the IP address for OAM authorization and available for edit. |
IPM Host IP address |
Specify the IP address for the IPM host system. |
IPM Host Port |
Displays the port number of the IPM host system and available for edit. |
Supported Auth Type |
Displays the authorization type supported by the application and available for edit. |
IPM Host username |
Specify the IPM host username. |
Supported Soft Token |
Displays the supported soft token type and available for edit. |
Administrator Supported Auth Type |
Displays the authorization type supported by the application for administrator users and available for edit. |
Identification Types |
Displays the identification type whether it is from local or remote and available for edit. |
Application Server Port |
Displays the application server port number and available for edit. |
Application Server Host |
Displays the address of the application server host and available for edit. |
Host WSDL Version |
Displays the host WSDL version number and available for edit. |
Port |
Displays the port for the host system and available for edit. |
FATCA Compliance check required (Y/ N) |
Displays whether the FATCA compliance check is required or not and available for edit. |
TD Pool Code |
Displays the pool code for TD account type and available for edit. |
Supported Auth Type |
Displays the authorization type supported by the application and available for edit. |
IPM Host application name |
Displays the IPM host application name and available for edit. |
Bank Code |
Displays the unique code to identify the bank and available for edit. |
Web Server Host |
Displays the address of web server host and available for edit. |
Port |
Displays the port for the host system and available for edit. |
Feedback for a Transaction |
Displays when the feedback for a transaction is required and available for edit. |
Retail User Supported Auth Type |
Displays the authorization type supported by the application for retail users and available for edit. |
Anonymous Security Policy |
Displays the security policy for anonymous user and available for edit. |
Application Server Port |
Displays the application server port number and available for edit. |
IDCS Connection Scheme |
Displays the IDCS connection scheme and available for edit. |
Port |
Displays the port for the host system and available for edit. |
Note: The fields appearing in the System Configuration – Dynamic Module – – Other Module tab depends on the settings done at the back end and is dynamic in nature.
- Edit the required – Other Module details.
- Click
OR
Click to cancel the transaction.
to save the changes. - The System Configuration - Dynamic Module – Other Module - Review screen appears. Verify the details, and click
OR
Click to cancel the transaction.
OR
Click the Basic Details, Bank Details, Branch Details, Currency Payments, SMTP or Third Party Configuration tabs to view and edit the respective details.
. - The screen with success message along with the reference number and status appears. Click OK to complete the transaction.
System Configuration - Dynamic Module - Origination - View and Edit
Using this option, the system administrator maintains the details for origination module. These configurations once defined can be viewed and edited.
To view and edit the origination module details:
- Click on System Configuration option on the dashboard and navigate to the dynamic module – Origination tab. The default option is ‘View’.
- Click to edit the Dynamic Module – Origination. The System Configuration - Dynamic Module – Origination screen appears in editable form.
Field Name |
Description |
---|---|
Savings First Body Header Additional Name |
Displays the name for additional parameter for savings account and available for edit. |
Current Second Body Header Function |
Displays the host system code for current account initiation stage and available for edit. |
Auto loan First Body Header Action |
Displays the host system code to start new auto loan application and available for edit. |
Current Location |
Displays the default location for current loan account and available for edit. |
Co- Applicant Registration URL |
Displays the URL for registration of the co-applicant and available for edit. |
Savings First Body Header Additional Value |
Displays the value for additional parameter for savings account and available for edit. |
Origination Date of Birth Limit Check |
Displays the option for validating the date of birth limit i.e. Local / Remote and available for edit. |
Preferred Mode of Offer Document Delivery |
Displays the preferred mode of delivery for the documents and available for edit. |
Current First Body Header Additional Value |
Displays the value of the additional parameter for current account and available for edit. |
Personal Loan Application Category |
Displays the host system application category for personal loan and available for edit. |
Personal Loan First Body Header Additional Value |
Displays the value of the additional parameter for personal loan account and available for edit |
Auto Loan Account Class |
Displays the host system account class for auto loans. |
Savings Process Code |
Displays the host system process code for savings account and available for edit. |
Savings Location |
Displays the default location for savings account and available for edit. |
Auto Loan First Body Header Additional Value |
Displays the value for additional parameter for auto loan and available for edit. |
Personal Loan Process Code |
Displays the host system process code for personal loan and available for edit. |
Personal Loan First body Header Function |
Displays the host system stage code for auto loans and available for edit. |
Current Second Body Header Additional Value |
Displays the value of the additional parameter for current account and available for edit. |
Savings Second Body Header Additional Name |
Displays the name for additional parameter for savings account and available for edit. |
Default Employer |
Displays the value of default employer and available for edit. |
Current Process Code |
Displays the host system process code for current account and available for edit. |
Auto Loan Header Function |
Displays the host system stage code for auto loan and available for edit. |
Savings Application Category |
Displays the savings account application category and available for edit. |
Personal Loan Header Function |
Displays the host system code for personal loan initiation stage and available for edit. |
Auto Loan Product Code |
Displays the host system product code for auto loans and available for edit. |
Savings Header Function |
Displays the host system code for savings account initiation stage and available for edit. |
Current Header Module |
Displays the module identifier for current account and available for edit. |
Current First Body Header Function |
Displays the host system code for current account initiation stage and available for edit. |
Auto loan Process Code |
Displays the host system process code for auto loan account and available for edit. |
Personal Loan Product Code |
Displays the host system product code for personal loan and available for edit. |
Savings App Status |
Displays the host system code for savings account application status and available for edit. |
Savings Second Body Header Additional Name |
Displays the name of the additional parameter for savings account and available for edit. |
Savings App State |
Displays the host system code for savings account application state and available for edit. |
Personal Loan First Body Header Additional Name |
Displays the name of the additional parameter for personal loan account and available for edit. |
Savings First Body Header Function |
Displays the host system stage code for savings account and available for edit. |
Personal Loan Location |
Displays the default location for personal loan account and available for edit. |
Auto Loan Application Category |
Displays the host system application category for auto loan account and available for edit. |
CASA Bundle Id |
Displays the bundle Id for current and savings account and available for edit. |
Personal Loan Header Module |
Displays the module identifier for personal loan account and available for edit. |
Savings second Body Header Function |
Displays the host system code for savings account initiation stage and available for edit. |
Savings Account Class |
Displays the host system account class for savings account and available for edit. |
Auto loan Header Module |
Displays the module identifier for auto loan account and available for edit. |
Current Account Class |
Displays the host system account class for current account and available for edit. |
Auto Loan First Body Header Additional Name |
Displays the name for additional parameter for auto loan and available for edit. |
Current Header Function |
Displays the host system code for current account initiation stage and available for edit. |
Auto Loan First Body Header Function |
Displays the host system stage code for auto loans and available for edit. |
Savings Header Module |
Displays the identifier of the module for savings account and available for edit. |
Current Application Category |
Displays the host system application category for current account and available for edit. |
Current First Body Header Additional Name |
Displays the name of the additional parameter for current account and available for edit. |
Current Second Body Header Action |
Displays the identifier to indicate modification of current account application and available for edit. |
Personal Loan Account Class |
Displays the host system account class for personal loan and available for edit. |
Auto Loan Location |
Displays the default location for auto loan account and available for edit. |
Current Second Body Header Additional Name |
Displays the name of the additional parameter for current account and available for edit. |
Note: The fields appearing in the System Configuration – Dynamic Module – Originations tab depends on the settings done at the back end and is dynamic in nature.
- Edit the required Origination module details.
- Click
OR
Click to cancel the transaction.
to save the changes. - The System Configuration - Dynamic Module – Origination - Review screen appears. Verify the details, and click
OR
Click to cancel the transaction.
OR
Click the Basic Details, Bank Details, Branch Details, Currency Payments, SMTP or Third Party Configuration tabs to view and edit the respective details.
. - The screen with success message along with the reference number and status appears.Click OK to complete the transaction.
System Configuration - Dynamic Module - Service Request - View and Edit
Using this option, the system administrator maintains the service request module details. These configurations once defined can be viewed and edited.
To view and edit the system configuration - dynamic module - service request details:
- Click on System Configuration option on the dashboard and navigate to the dynamic module – Service Request tab. The default option is ‘View’.
- Click to edit the Dynamic Module – Service Request details. The System Configuration - Dynamic Module – Service Request screen appears in editable form.
Field Name |
Description |
---|---|
Request Expiration duration (in days) |
Displays the number of days after which service requests gets expired after submission and is available for edit. |
Service Request Turnaround Time |
Displays the turnaround time for service request and available for edit. |
Service Request Persistent Type |
Displays the persistent type for service request and available for edit. |
- In the Request Expiration duration (in days) field, edit the values for expiration duration, if required.
- In the Service Request Turnaround Time field, edit the values, if required.
- In the Service Request Persistent Type field, edit the persistent type for service request, if required.
- Click
OR
Click to cancel the transaction.
to save the changes. - The System Configuration - Dynamic Module – Service Request - Review screen appears. Verify the details, and click
OR
Click to cancel the transaction.
OR
Click the Basic Details, Host Details, Bank Details, Branch Details, Currency Details, SMTP or Dynamic Module tabs to view and edit the respective details if required.
. - The screen with success message along with the reference number and status appears. Click OK to complete the transaction.
System Configuration - Module - Common - View and Edit
Using this option, the system administrator maintains the Common module details. These configurations once defined can be viewed and edited.
To view and edit the system configuration - dynamic module - Common details:
- Click on System Configuration option on the dashboard and navigate to the dynamic module – Common tab. The default option is ‘View’.
- Click to edit the Dynamic Module – Common details. The System Configuration - Dynamic Module – Common screen appears in editable form.
Field Name |
Description |
---|---|
Batch Request URL |
Displays the URL for the batch request and is available for edit. |
- In the Batch Request URL field, edit the web address if required.
- Click
OR
Click to cancel the transaction.
to save the changes. - The System Configuration - Dynamic Module – Common - Review screen appears. Verify the details, and click
OR
Click to cancel the transaction.
OR
Click the Basic Details, Bank Details, Branch Details, Currency Payments, SMTP or Third Party Configuration tabs to view and edit the respective details.
. - The screen with success message along with the reference number and status appears. Click OK to complete the transaction.