E4255 Cmd Rej: Total provisioned system TPS limit exceeded

If the HIPR2 High Rate Mode feature is turned off, then the total TPS of all signaling links configured in the EAGLE must be less than or equal to 500,000 TPS. If the HIPR2 High Rate Mode feature is turned on, then the total TPS of all signaling links configured in the EAGLE must be less than or equal to 750,000 TPS.

Note:

The total system TPS is equal to the SIGTRAN TPS + the ATM TPS.

Recovery

1. Display the System TPS. Enter the rtrv-tps command.
2. Display the IPTPS values for the linksets. Enter the rept-stat-iptps command.
3. Perform one of the following:
   • Reduce the TPS for the other linksets. Refer to Database Administration - IP7 User's Guide and Database Administration - SS7 User's Guide for assistance.
   • Turn on the HIPR2 High Rate Mode feature (if the desired TPS is between 500,000 and 750,000). Refer to Database Administration - System Management User's Guide for assistance.
4. Re-enter the command that generated this error message.
   Contact My Oracle Support if this error message appears again. See My Oracle Support (MOS).