E4617 Cmd Rej: SEAS Terminal is Auto-Inhibited

The specified terminal cannot be an auto-inhibited SEAS terminal.

Recovery

1. Determine the reason the SEAS terminal is auto-inhibited:
   1. Display the status of the SEAS Over IP feature. Enter the rtrv-ctrl-feat command. If the feature does not appear in the output, then the feature is not enabled. If the feature has a status of OFF, then the feature is enabled but is not turned on. Turn on the feature as necessary. Refer to the Database Administration - System Management User's Guide for assistance.
   2. Determine whether an E5-IPSM card is present. Enter the rtrv-trm command. Configure an E5-IPSM card as necessary. Refer to the Database Administration - System Management User's Guide for assistance.
   3. Determine if the terminal became auto-inhibited due to a critical thermal alarm. In this case, refer to the Unsolicited Alarm and Information Messages Reference for assistance.
2. Re-enter the alw-trm command that generated this error message.
   Contact My Oracle Support if this error message appears again. See My Oracle Support (MOS).