E4490 Cmd Rej: Card type must be DCM/SLIC for a 100Mbit
link
If the
speed=100 parameter is specified,
then the card in the specified location must be an E5-ENET
or E5-ENET-B card running the SLANHC GPL. For
both cards, the card type in the
ent-card command is DCM.
Recovery
Display the card information. Enter the
rtrv-card command and
rtrv-stp commands.
Replace the cards as necessary. Refer to
Maintenance Guide for assistance.
Re-enter the
ent-dlk command that generated this
error message, specifying a valid combination of parameters. Refer to the
command description in
Commands User's Guide and to
Database Administration - Features User's
Guide for assistance.
