E2085 Cmd Rej: A-Port, G-Port or IGM must be turned ON

For the enable-ctrl-feat command, the A-Port, G-Port, or IGM feature must be on before the MNP Circular Route Prevention feature can be enabled.

For the ent/chg-srvsel commands, the A-Port or IGM feature must be turned on, or the A-Port or IGM feature must be enabled and the G-Port feature must be turned on before a value of mnp can be specified for the (n)serv parameter.

Recovery

1. Display the status of controlled features in the system. Enter the rtrv-ctrl-feat command.
   If the feature does not appear in the output, then the feature is not enabled. If the feature has a status of OFF, then the feature is enabled but is not turned on.
2. Enable or turn on the desired feature. Refer to the A-Port User's Guide, IS41 GSM Migration User's Guide, and the G-Port User's Guide for assistance.
3. Re-enter the command that generated this error message.
   Contact My Oracle Support if the error message appears again. See My Oracle Support (MOS).