E4982 Cmd Rej: At least one TIF feature must be enabled

For the chg-gws-actset command, at least one TIF feature must be enabled before the tif, tif2, or tif3 stop action can be specified.

For the ent/chg-dstn commands, at least one TIF feature must be enabled before the splitiam parameter can be specified.

At least one TIF feature must be enabled before the chg-isup-msg or chg-tifopts commands can be entered.

For the tst-msg command, at least one TIF feature must be enabled before a value of tif, tif2, or tif3 can be specified for the feat parameter.

Recovery

1. Display the status of controlled features in the system. Enter the rtrv-ctrl-feat command.
   If the feature is not shown in the output, then the feature is not enabled. If the feature has a status of OFF, then the feature is enabled but is not turned on.
2. Enable at least one TIF feature. Refer to the TIF User's Guide for assistance.
3. Re-enter the command that generated this error message.
   Contact My Oracle Support if this error message appears again. See My Oracle Support (MOS).