E2405 Cmd Rej: GTA/SADDR does not exist in any range

The global title address/start address specified by the gta/saddr parameter must already exist.

The number of digits in the specified gta/saddr parameter must be at least the number of digits provisioned for the GTT set specified by the gttsn parameter. If the VGTT feature is turned on, then up to 10 GTA/SADDR lengths can exist per GTT set. If the VGTT with 16 lengths Support for 16 GTT Lengths in VGTT feature is turned on, then up to 16 GTA/SADDR lengths can exist per GTT set.

Recovery

1. Display the valid GTA range for the command of interest. Enter the rtrv-gtt command or the rtrv-gta:gttsn= command.
2. Display the status of the VGTT and VGTT with 16 lengths Support for 16 GTT Lengths in VGTT features. Enter the rtrv-feat and rtrv-ctrl-feat commands, respectively.
   For the rtrv-ctrl-feat command, if the VGTT with 16 lengths Support for 16 GTT Lengths in VGTT feature does not appear in the output, then the feature is not enabled. If the feature has a status of OFF, then the feature is enabled but is not turned on.
3. Revise the data as necessary. Refer to the Database Administration - GTT User's Guide for assistance.
4. Re-enter the command that generated this error message, specifying a valid combination of parameters. Refer to the command description in Commands User's Guide and to the Database Administration - GTT User's Guide for assistance.
   Contact My Oracle Support if this error message appears again. See My Oracle Support (MOS).