E2558 Cmd Rej: Point code already exists in given SR

The specified point code cannot already exist in the screening reference. If asterisks or ranges are specified for the point code, nothing that matches the specified range or point codes can already exist in the screening table for the screening reference.

If the SR already exists, the blocked OPC cannot be defined as specified or exist within an existing range of OPCs. The blocked OPC that was intended to be added to the BLKOPC screening table for the blocked OPC SR was specified by one of these parameter sets: ni-nc-ncm, zone-area-id, msa-ssa-sp, or npc.

Recovery

1. Display the screening reference data. Enter the appropriate rtrv- command (for example, if the ent-scr-blkdpc command generated the error message, then enter the rtrv-scr-blkdpc command).
2. Re-enter the command that generated this error message, specifying a different point code for the screening reference. Refer to the command description in Commands User's Guide and to the Database Administration - GWS User's Guide for assistance.