E4717 Cmd Rej: EIR/VFLEX feature must be ON or ATINP/AIQ must be enabled

The EIR or V-Flex feature must be turned on or the ATINP or AIQ feature must be enabled before the value specified for the pci/mpci parameter can be a true point code.

Recovery

1. Display the status of controlled features in the system. Enter the rtrv-ctrl-feat command.
   If the feature does not appear in the output, then the feature is not enabled. If the feature has a status of OFF, then the feature is enabled but is not turned on.
2. Display the true point codes in the system. Enter the rtrv-sid command.
3. Enable or enable and turn on the desired feature. Refer to the appropriate feature manual for assistance.
4. Re-enter the ent/chg-map command that generated this error message, specifying a valid combination of parameters. Refer to the command description in Commands User's Guide and to the Database Administration - GTT User's Guide for assistance.
   Contact My Oracle Support if this error message appears again. See My Oracle Support (MOS).