E3448 Cmd Rej: LHOST has open socket or association

For the chg-ip-lnk command, a local IP address cannot be changed if the current or new local host has open sockets or associations (the open parameter set to yes with the ent/chg-assoc command).

For the dlt-slk command, an IPLIMx or IPGWx signaling link assigned to a local host cannot be deleted if the link has open sockets or associations.

Note:

Open sockets or associations are provisioned with the open=yes parameter in the chg-assoc command.

For the ent-dconn command, any OPEN association cannot be assigned to a new diameter connection (the open parameter set to yes/no with the chg-assoc command).

Recovery

1. Display the host name for the local host. Enter the rtrv-ip-host command.
2. Display connection status for the associations. Enter the rtrv-assoc command for the local host name.
3. Change the connection status of each open association as desired. Refer to Database Administration - IP7 User's Guide for assistance.
4. Re-enter the command that generated this error message.

   Contact My Oracle Support if this error message appears again. See My Oracle Support (MOS).

Recovery - ent-dconn

1. Enter the rtrv-assoc:aname=<association name specified> command to display the association detail.
2. Enter the chg-assoc:aname=<association name>:open=no command to change the state of the association from open to closed.
3. Re-enter the command that generated this error message.
   Contact My Oracle Support if this error message appears again. See My Oracle Support (MOS).