E2470 Cmd Rej: Point Code network type does not match TT network type

The ANSI/ITU SCCP Conversion feature must be enabled before a translated point code and a translation type in different network types can be specified.

Recovery

1. Display the status of the ANSI/ITU SCCP Conversion feature. Enter the rtrv-ctrl-feat command.
   If the feature does not appear in the output, then the feature is not enabled. If the feature has a status of OFF, then the feature is enabled but is not turned on.
2. Enable the feature as necessary. Refer to Database Administration - GTT User's Guide for assistance.
3. Display the network type of point codes in the system. Enter the rtrv-sid command.
4. Display the network type of translation types. Enter the rtrv-tt command.
5. Revise the existing point codes and translation types or add new point codes and translation types as desired. Refer to Database Administration - SS7 User's Guide for assistance with point codes and to Database Administration - GTT User's Guide for assistance with translation types.
6. Re-enter the command that generated this error message, specifying a valid combination of parameters. Refer to the command description in Commands User's Guide for assistance.
   Contact My Oracle Support if this error message appears again. See My Oracle Support (MOS).