E2160 Cmd Rej: Measurements collect must be off

For the act-upgrade command, the Measurements Collection function must be turned off (chg-meas:collect=off) or the Measurements Platform feature must be turned on (chg-measopts:platformenable=on) before a value of convertoam, oamcomplete, or netcomplete can be specified for the action parameter.

Caution:

It is strongly recommended that this command be used only in conjunction with the system Upgrade Procedure for the target release. The Upgrade Procedure provides step-by-step information on performing an upgrade.

For the copy-disk command, OAM measurements collection cannot be in progress when this command is entered.

Measurements collection must be inhibited before the format-disk command can be executed.

• Do not enter the chg-measopts:collect=on command while the format-disk command is in progress. This results in read and write errors, because the standby disk is not accessible.
• Do not enter format-disk until the 30 minute measurements processing or the midnight measurements processing has completed, because inhibiting measurements during these periods results in the loss of measurement data for the period being processed.

Recovery - act-upgrade command

1. Determine the status of the Measurements Collection function. Enter the rtrv-meas-sched command.
2. Determine the status of the Measurements Platform feature. Enter the rtrv-measopts command.
3. Turn off the Measurements Collection function or turn on the Measurements Platform feature as necessary. Refer to the Database Administartion - Systems Management User's Guide for assistance.
4. Re-enter the act-upgrade command that generated this error message.

Recovery - copy/format-disk commands

Contact My Oracle Support before entering the copy-disk or format-disk command. See My Oracle Support (MOS).