Go to primary content
Oracle® Communications EAGLE Commands Error Recovery Reference
Release 46.8
F11879 Revision 1
Go To Table Of Contents
Contents

Previous
Previous
Next
Next

E4008 Cmd Rej: Exceeding max GTA/SADDR Lengths supported per GTTSET

If the VGTT feature is turned on, then up to 10 GTA/SADDR lengths can exist per GTT set. If the Support for 16 GTT Lengths in VGTT feature is turned on, then up to 16 GTA/SADDR lengths can exist per GTT set.

Note:

Once a feature that is controlled using a feature bit has been turned on it cannot be turned off.

Recovery

  1. Display the status of the VGTT feature. Enter the rtrv-feat command.
  2. Display the status of the Support for 16 GTT Lengths in VGTT feature. Enter the rtrv-ctrl-feat command.
    If the feature does not appear in the output, then the feature is not enabled. If the feature has a status of OFF, then the feature is enabled, but is not turned on.
  3. Display all GTAs for the specified GTT set. Enter the rtrv-gta command.
  4. Turn on the feature or delete GTAs as needed. Refer to the Database Administration - GTT User's Guide for assistance.
  5. Re-enter the ent-gta command that generated this error message.
    Contact My Oracle Support if this error message appears again. See My Oracle Support (MOS).