E3557 Cmd Rej: EGTT must be ON

The Enhanced GTT (EGTT) feature must be turned on before the ent/chg/dlt/rtrv-gta, ent/chg/dlt/rtrv-gttsel, or ent/chg/dlt/rtrv-gttset commands can be entered.

For the enable-ctrl-feat command, the EGTT feature must be turned on before the Flexible Linkset Optional Based Routing (FLOBR), GTT Action - DISCARD, GTT Action - DUPLICATE, GTT Action - FORWARD, MO SMS B-Party Routing, or Origin-based SCCP Routing (OBSR) features can be enabled:

For the chg-gsmsmsopts command, the EGTT feature must be turned on before the is41smscgttsn parameter can be specified.

For the chg-mtc-measopts command, the EGTT feature must be turned ON before the mtchgttset=on or mtcdgttset=on parameters can be specified.

For the ent/chg-lnp-serv commands, the EGTT feature must be turned on before the (n)gttselid, (n)dfltact, or on/off=gttrqd parameter can be specified.

For the ent/chg/rtrv-srvsel command, the EGTT feature must be turned on before the (n)gttselid or (n)dfltact parameter can be specified.

For the ent-gttact command, the EGTT feature must be turned on before the srvc or scpval GTT Action can be entered.

For the rept-ftp-meas command, the EGTT feature must be turned ON before the enttype=gttset parameter can be specified.

Note:

Once a feature that is controlled using a feature bit has been turned on, it cannot be turned off.

Recovery

1. Display the status of the EGTT feature. Enter the rtrv-feat command.
2. Turn on the EGTT feature if necessary. Refer to the Database Administration - GTT User's Guide for assistance.
3. Re-enter the command that generated this error message.
   Contact My Oracle Support if this error message appears again. See My Oracle Support (MOS).