E4997 Cmd Rej: SETTYPE of specified GTTSET must be CdGTA

Note:

The set type is provisioned using the ent-gttset command.

For the chg-gsmsmsopts command, the GTT set specified by the bpartygttsn or is41smscgttsn parameter must have a GTT set type of cdgta.

For the chg-is41smsopts command the GTT set specified by the bpartygttsn parameter must have a GTT set type of cdgta.

For the ent/chg/dlt/rtrv-gtt command, the GTT set associated with the translation type specified by the ttn parameter must have a GTT set type of cdgta.

For the dlt/rtrv-tt command the GTT set associated with the translation type specified by the ttn parameter must have a GTT set type of cdgta.

Recovery

Note:

The Origin-based SCCP Routing (OBSR) feature must be turned on before GTT set type information is shown in the output for the rtrv-gttset command.

1. Display the status of the OBSR feature. Enter the rtrv-ctrl-feat command.
   If the feature does not appear in the output, then the feature is not enabled. If the feature has a status of OFF, then the feature is enabled but is not turned on.
2. Enable and turn on the OBSR feature as necessary. Refer to the Database Administration - GTT User's Guide for assistance.
3. Display the GTT set information. Enter the rtrv-gttset command.
4. If necessary, change the set type of the GTT set to cdgta. Refer to the Database Administration - GTT User's Guide for assistance.
5. Re-enter the command that generated the error message.
   Contact My Oracle Support if this error message appears again. See My Oracle Support (MOS).